Need clarification on K24Z3 and 06-08 K24A2 cam differences

Post your non-Hondata questions / problems here.
Locked
Scourge
Posts: 30
Joined: Thu Sep 15, 2005 10:53 pm

Need clarification on K24Z3 and 06-08 K24A2 cam differences

Post by Scourge » Tue Oct 18, 2016 4:02 pm

Now this is confusing as hell... Someone from Hondata posted in TSX Club showing the 09 TSX intake cam as having less lift (though it looks pretty damn close)...
http://www.tsxclub.com/forums/1st-gen-e ... rison.html

And Katman's specs here from Honda themselves show that when you measure the lobes with standard measuring equipment (micrometer or caliper), the K24Z3 lobes are bigger (from 0 lift to highest lift). Of course, if the diameter across two 0 lift sides is bigger to start with, that would explain that... But my various OEM K-series cams seem to be pretty much the same diameter across the 0 lift sections.
http://www.k20a.org/forum/showpost.php? ... tcount=107

So, can anyone explain? I have a set of K24Z3 cams and I'll be grabbing some 08 TSX cams soon. Anyway, I'll try to remember to post afterwards if nobody does first...

Also, has anyone from Hondata measured the exhaust lobes off of the K24Z3 and compared them to the K24A2 exhaust cam?

bian.yy
Posts: 48
Joined: Tue Jan 12, 2016 6:04 pm

Re: Need clarification on K24Z3 and 06-08 K24A2 cam differences

Post by bian.yy » Sun Oct 30, 2016 11:59 pm

The info I studied is K24Z3 intake cam is between tsx 0405 and 0708, it's very close to 0708.

Locked