Hi Hondata,
can be a new/other ECU from a used EP3 which have K-Pro fitted swapped into a different car?
A new customer looking for a K-Pro tune with a new ECU. The current ECU he would not touch.
Thanks for reply.
Install new used EP3 ECU with K-Pro into car
Re: Install new used EP3 ECU with K-Pro into car
I'm sorry, but I don't understand the question.
Re: Install new used EP3 ECU with K-Pro into car
#1 Buy new ECU fitted with K-PRO v4 from CPL-racing
#2 Unmount old ECU from the EP3 (without K-Pro)
#3 Fit the new ECU with K-Pro
#4 Upload start calibration, start engine
> Now running fine? No Errors?
On the FN2 it is really pain in the ass... The Honda-Dealer must brick/activate the new ECU so that the car start...
Did you confirm that I can easy buy a new ECU and start the engine without issues?
#2 Unmount old ECU from the EP3 (without K-Pro)
#3 Fit the new ECU with K-Pro
#4 Upload start calibration, start engine
> Now running fine? No Errors?
On the FN2 it is really pain in the ass... The Honda-Dealer must brick/activate the new ECU so that the car start...
Did you confirm that I can easy buy a new ECU and start the engine without issues?
Re: Install new used EP3 ECU with K-Pro into car
Yes that will work, but if you want the immobilizer to work, you will have to get the key and immobilizer matched to the new ECU by a Honda dealership.