problem with jrsc
problem with jrsc
Engine stock + jrsc. There is a problem with afr on WOT. The beginning is rich, then AFR goes to 14.4-14.5 for boost. No AFM, only MAP. Other basemap with AFM this same situation.
Where to look for a problem?
Time 0:27 - 0:28
Where to look for a problem?
Time 0:27 - 0:28
Re: problem with jrsc
Flashpro manager displays boost
Re: problem with jrsc
Can you post a datalog, please!
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Re: problem with jrsc
The fuel tables are a mess. Only the 0 degree table has been altered, and then in a bad way.
Hondata
Re: problem with jrsc
Yes, it's for the test, but increasing the fuel has no afr change in the boost around 0.3bar or more
Re: problem with jrsc
Check your fuel pressure as it looks like it may be dropping.
Re: problem with jrsc
I'm fairly sure you're only changing the 0 degree table, not all of them.
Hondata
Re: problem with jrsc
Yes, but all cells in vtc low cam are set to 0
Re: problem with jrsc
fuel pressure 3,2-3,3bar hi-load, low load 3.5
each vtc setting (15 *, 30 *, 40 *) is the same. About 0.3 bar arf increases
each vtc setting (15 *, 30 *, 40 *) is the same. About 0.3 bar arf increases
Re: problem with jrsc
problem solved, o2 sensor damaged, the external sensor 02 displays the actual values on all vtc and boost