Cam angle map info??
Cam angle map info??
Hi guys, sure it's a very easy question but on the cam angle maps on hondata if I selects the 0 degrees map for instance why in that map are there angles that are not 0 degrees?? It's the same thing with all the other degrees. Cheers
Re: Cam angle map info??
The cam angle maps are populated with the values for the amount of cam advance you want. The only time you can look at the tables for specific cam angles is in the fuel and ignition tables.
Re: Cam angle map info??
Mmm still don't get it lol so when I use the drop down menu and look at 10degree map and see values from 0-40 etc why aren't they all 10? What do the numbers represent? I know they are cam aims but why are there higher than 10 cam aims in the 10 degree cam map?
Re: Cam angle map info??
What vehicle are you referring to?
Re: Cam angle map info??
Type r fn2 K20Z bro
Re: Cam angle map info??
Watched a few videos but still don't fully understand
Re: Cam angle map info??
Have you read the info in the help file: https://www.hondata.com/help/flashpro/t ... or_vtc.htm
Re: Cam angle map info??
I have bro but I still lile I need a better explanation of hoe the tables are used
Re: Cam angle map info??
Please read the info at:
https://www.hondata.com/tech-rsx-vtec-vtc
https://www.hondata.com/tech-vtec-crossover
The VTC table has a composite map that has the best cam advance settings for making power.
https://www.hondata.com/tech-rsx-vtec-vtc
https://www.hondata.com/tech-vtec-crossover
The VTC table has a composite map that has the best cam advance settings for making power.
Re: Cam angle map info??
Yeh I understand what the principles are bro...but I mean you have to tune earth cam angle map right? I just don't get how we tune 10 degree map with other numbers than 10. Lile on low load why does the 10 degree angle map have 25 and that in it? I've attached a pic
Re: Cam angle map info??
The CAM angle map tells it which cam angle fuel and ignition map to use for that load.
Re: Cam angle map info??
But there is numbers in the middle that are different to 0 degrees cam angle....surely the 25/35 degrees should be in the 30/40 degree mps from drop down menu??
Re: Cam angle map info??
Edit all the tables to 0 degrees and tune then to 10 degrees then tune.. ect .. then once you've done it all set the cam angles to where you make peak torque
Re: Cam angle map info??
Yeh I just don't understand why in the drop down menu of "0 degrees" there are values of 25/35 etc