S300 not working!

Hondata model coverage & ECU application questions.
Post Reply
delsol93
Posts: 1
Joined: Sat May 11, 2019 8:04 am

S300 not working!

Post by delsol93 »

I just installed my s300 into a p28 ecu and unfortunately i'm having some problems with it. first of all I can upload tunes successfully, but when i try to data log or even just watch the sensors on the display page i see nothing happening. I can calibrate the TPS so its obviously picking up a signal from the sensor, but again when i watch the TPS on the display page nothing changes. I have data logging enabled in the settings so i'm not sure what the problem is, i'm guessing i just did a poor job soldering the board on. Is there any way for me to confirm this? I would really appreciate any help at all on this. Thanks in advance!
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: S300 not working!

Post by Spunkster »

Has J12 been cut on the ECU?
Post Reply