Throttle tip-in missing?

FlashPro Manager software
Post Reply
BrokeBoisCivic
Posts: 2
Joined: Sun May 26, 2019 9:08 am

Throttle tip-in missing?

Post by BrokeBoisCivic » Sun May 26, 2019 9:46 am

Hello!
I've got a FlashPro for a 2012 Civic SI. Currently running FlashProManager version 3.3.7.0.
I can't seem to find throttle tip-in parameters in the throttle section. Was this removed at some point? Is it not supported for the 2012 Civics?
I've attached a screenshot and the calibration that is currently on my car.

Thanks!
Attachments
MainCalibrationMAPONLYnew.fpcal
(20.57 KiB) Downloaded 15 times
ThrottleTip-inMissingCapture.PNG
ThrottleTip-inMissingCapture.PNG (53.86 KiB) Viewed 383 times

User avatar
Hondata
Site Admin
Posts: 8760
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Throttle tip-in missing?

Post by Hondata » Mon May 27, 2019 5:20 pm

ECUs are different between vehicles, so if you're looking for something from a different model then the 2012 may not have the same ECU logic or the same tables.
Hondata

BrokeBoisCivic
Posts: 2
Joined: Sun May 26, 2019 9:08 am

Re: Throttle tip-in missing?

Post by BrokeBoisCivic » Mon May 27, 2019 8:08 pm

Odd... If there is no throttle tip-in parameters, does that mean I'm stuck with it going lean for a little? How is throttle tip-in calculated (if at all) if there is no throttle tip-in parameters?

Post Reply