PND K-Pro Reverse Lockout HELP!

K-Series Programmable ECU installation questions / support issues
Kr4nG
Posts: 25
Joined: Sat Sep 15, 2018 9:25 pm

PND K-Pro Reverse Lockout HELP!

Post by Kr4nG »

I have been searching for days on how to install the reverse lockout and I have one question. Do I need a relay? So im using 02-04 type s harness with PND Kpro. According to hondata you can activate the reverse lockout with pin B22 (secondary intake runner) by using a PND (type s) calibration. I have moved the wire from B7 RVS to B22 intake runner. So my concern is if it okay to run the car just by moving the wire or do I need to install the relay between them. Please anyone that has done this please let me know asap.


"Changed PRB calibration to activate reverse lock out via pin B22 (secondary intake runner). This allows PND ECUs to be used rather than the PRB ECU."
https://www.hondata.com/kpro-help
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: PND K-Pro Reverse Lockout HELP!

Post by Spunkster »

You just need to move the wire. No relay is needed.
Kr4nG
Posts: 25
Joined: Sat Sep 15, 2018 9:25 pm

Re: PND K-Pro Reverse Lockout HELP!

Post by Kr4nG »

Thank you. I will plug it in now. Do you happen to know when the solenoid gets triggered? Does it get triggered via RPM, Speed, or Load?
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: PND K-Pro Reverse Lockout HELP!

Post by Spunkster »

It is based on speed, exactly as the OEM reverse lockout is.
Kr4nG
Posts: 25
Joined: Sat Sep 15, 2018 9:25 pm

Re: PND K-Pro Reverse Lockout HELP!

Post by Kr4nG »

Works like OEM. Confirmed. Thank you so much.
Gabby Rios
Posts: 1
Joined: Tue Mar 10, 2020 3:11 pm

Re: PND K-Pro Reverse Lockout HELP!

Post by Gabby Rios »

Hi guys, new to the site. Question, how did you find where pin b22 is? I have to do the same thing.
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: PND K-Pro Reverse Lockout HELP!

Post by Spunkster »

Knox
Posts: 138
Joined: Mon Jun 06, 2011 6:01 pm

Re: PND K-Pro Reverse Lockout HELP!

Post by Knox »

Spunkster wrote: Mon Sep 17, 2018 11:03 am You just need to move the wire. No relay is needed.
Hello, I just move b7 to b22 on prb calibration with pnd ecu but reverse lockout did not work. Car is jdm dc5 type r, may be I make something incomplete. Am I need to just relocate the wire and thats it?

Thanks.
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: PND K-Pro Reverse Lockout HELP!

Post by Spunkster »

What is the code on the side of the ECU?
Knox
Posts: 138
Joined: Mon Jun 06, 2011 6:01 pm

Re: PND K-Pro Reverse Lockout HELP!

Post by Knox »

Spunkster wrote: Fri Jun 26, 2020 9:13 am What is the code on the side of the ECU?
Hello, I'm sorry its 37820-PNF-E01 not pnd ecu. Can I use the speed lock with this ecu?
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: PND K-Pro Reverse Lockout HELP!

Post by Spunkster »

I don't believe that a PNF-E01 is compatible with K-Pro.
Knox
Posts: 138
Joined: Mon Jun 06, 2011 6:01 pm

Re: PND K-Pro Reverse Lockout HELP!

Post by Knox »

Spunkster wrote: Mon Jun 29, 2020 2:10 pm I don't believe that a PNF-E01 is compatible with K-Pro.
Hello, I checked right now and also inside board is PNF-E01 (I did nor open the up cover completely because of there is warranty seal but I just look between cover and writing on the socket section is also PNF-E01). Ecu is come from United Kingdom and kpro works (because I tried it) also wideband works. The only way for reverse lock is I think using the nitrous output?
Knox
Posts: 138
Joined: Mon Jun 06, 2011 6:01 pm

Re: PND K-Pro Reverse Lockout HELP!

Post by Knox »

Spunkster wrote: Mon Jun 29, 2020 2:10 pm I don't believe that a PNF-E01 is compatible with K-Pro.
Hello, ecu is PNF-01 from United Kingdom with kpro4 and works. Today I tried to use nitrous output for reverse lock and it did not lock reverse solenoid. So I want to confirm the wirings.
On the relay I wired:
pin e21 to relay 85
relay 86 to switched 12v
relay 30 to rvs solenoid ground
relay 87 to chassis ground
relay 87/2 empty.

Am I make something wrong ?
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: PND K-Pro Reverse Lockout HELP!

Post by Spunkster »

Post a picture of the inside of the ECU?
Knox
Posts: 138
Joined: Mon Jun 06, 2011 6:01 pm

Re: PND K-Pro Reverse Lockout HELP!

Post by Knox »

Spunkster wrote: Mon Aug 31, 2020 9:46 am Post a picture of the inside of the ECU?
I attached some detailed pictures with kpro and without kpro.
Attachments
IMG_0615.JPG
IMG_0615.JPG (4.53 MiB) Viewed 25391 times
IMG_0614.JPG
IMG_0614.JPG (4.99 MiB) Viewed 25391 times
IMG_0613.JPG
IMG_0613.JPG (4.58 MiB) Viewed 25391 times
IMG_0612.JPG
IMG_0612.JPG (4.79 MiB) Viewed 25391 times
Post Reply