Base map cammed

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
JUSTIN1997FA5
Posts: 6
Joined: Fri Oct 09, 2020 12:13 am

Base map cammed

Post by JUSTIN1997FA5 »

Hey guys i currently have a 2010 si sedan looking for a base map to start the car on, I'm nearly finished my build and I'm gonna need to start it soon to be able to drive it around,
Car is a stock block k20z3
With type R oil pump
Drag cartel lower chain guide
All new guides and chain
Inline pro tensioner
Drag cartel 2.2 cams
Super tech
Springs, retainers, seats, keepers, valve seals, 1mm oversize valves
Arp head studs
Ported head
The car also has
Skunk 2 alpha header
Hybrid racing cai
Rdx injectors
Zdx tb
Ported rbc
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: Base map cammed

Post by CalibratEd »

I posted a basemap for you back in October but you never replied to the thread. Did you ever upload the file to the car?
viewtopic.php?f=25&t=23803

-Ed
JUSTIN1997FA5
Posts: 6
Joined: Fri Oct 09, 2020 12:13 am

Re: Base map cammed

Post by JUSTIN1997FA5 »

Also has light weight flywheel and exedy stg1 clutch
JUSTIN1997FA5
Posts: 6
Joined: Fri Oct 09, 2020 12:13 am

Re: Base map cammed

Post by JUSTIN1997FA5 »

CalibratEd wrote: Thu Jan 21, 2021 7:46 pm I posted a basemap for you back in October but you never replied to the thread. Did you ever upload the file to the car?
viewtopic.php?f=25&t=23803
No I didn't I ended up just going deeper into the engine lol, sorry about that
-Ed
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: Base map cammed

Post by CalibratEd »

Try this basemap and post a datalog to see where it needs adjustment.

-Ed
Attachments
JUSTIN1997FA5__Base.fpcal
(18.76 KiB) Downloaded 119 times
SwarlsBarkley
Posts: 1
Joined: Tue Jan 26, 2021 3:02 am

Re: Base map cammed

Post by SwarlsBarkley »

Hi, I am also having trouble getting the cam angles right for my car. i have a 2008 fn2
k20z stock block
skunk2 tuner 1 v3 cams
skunk2 valvetrain
skunk2 pro intake
zdx throttle body
90mm indiction
76mm exhuast
4-2-1 custom branch
rdx injectors

if someone can help with a example of how the low, high cam angles and timing should look like, or just a base to start with more or less.

i am doing something wrong big time, the car feels way off. not even as good as stock. think i lost power.
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: Base map cammed

Post by CalibratEd »

SwarlsBarkley wrote: Tue Jan 26, 2021 3:14 am Hi, I am also having trouble getting the cam angles right for my car. i have a 2008 fn2
k20z stock block
skunk2 tuner 1 v3 cams
skunk2 valvetrain
skunk2 pro intake
zdx throttle body
90mm indiction
76mm exhuast
4-2-1 custom branch
rdx injectors

if someone can help with a example of how the low, high cam angles and timing should look like, or just a base to start with more or less.

i am doing something wrong big time, the car feels way off. not even as good as stock. think i lost power.
Start your own thread and post a datalog and tune file. I or other will be able to better assist you.

- Ed
Post Reply