No Wideband input into ecu

FlashPro questions & answers specific to the FD2 Japanese Civic Type R
Post Reply
astute80
Posts: 4
Joined: Sat Jun 15, 2019 7:04 am

No Wideband input into ecu

Post by astute80 »

Hi, I connected my PLX o2 wideband into B29 of the ecu and selected EGRL in the wideband lambda input. However, there is no reading in hondata sensor or datalog.
Attachments
8 Oct 2021.fpdl
(261.73 KiB) Downloaded 163 times
Remove Cat 8 Oct 21 New Wideband.fpcal
(20.05 KiB) Downloaded 154 times
User avatar
Spunkster
Site Admin
Posts: 22703
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: No Wideband input into ecu

Post by Spunkster »

Was there a wire in that spot of the harness?
astute80
Posts: 4
Joined: Sat Jun 15, 2019 7:04 am

Re: No Wideband input into ecu

Post by astute80 »

No, it was unused so I connected the wire there
User avatar
Spunkster
Site Admin
Posts: 22703
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: No Wideband input into ecu

Post by Spunkster »

The Japanese ECU may not have the circuitry needed for this to work on that input since there was no wire there.
astute80
Posts: 4
Joined: Sat Jun 15, 2019 7:04 am

Re: No Wideband input into ecu

Post by astute80 »

This information was from Hondata that B29 is supposed to be unused
Attachments
hondata B29.jpg
hondata B29.jpg (60.53 KiB) Viewed 3061 times
User avatar
Hondata
Site Admin
Posts: 10428
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: No Wideband input into ecu

Post by Hondata »

What ECU are you using?
Hondata
astute80
Posts: 4
Joined: Sat Jun 15, 2019 7:04 am

Re: No Wideband input into ecu

Post by astute80 »

2007 JDM FD2 Type R ECU
User avatar
Hondata
Site Admin
Posts: 10428
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: No Wideband input into ecu

Post by Hondata »

I do not think that ECU has the internal circuitry to support an input on B29.
Hondata
Post Reply