2019 Hondata Mobile for Head Unit - Knock Count

FK2 Civic Type R 2015-2017, FK8 Civic Type R 2017-2021, FL5 Civic Type R 2023+ and Integra Type S 2024+
Post Reply
linwozzle
Posts: 1
Joined: Thu Jun 06, 2019 12:15 pm

2019 Hondata Mobile for Head Unit - Knock Count

Post by linwozzle »

I have a 2019 Type R with Flex Fuel and not able to show any knock information (retard, count, level) via the rooted head unit. I am using FlashPro Manager 3.3.9.0 with FlashPro being updated to the new firmware after connecting, FlashPro is also enabled for alternative pairing mode for head unit 2018+ Civic via FlashPro Manager. The Hondata Mobile Android (Dash) app .apk was downloaded via FlashPro Manager. Trying to show any knock values (retard, count, level) on any analog displays show up at None (). See attached for photos, none is shown on bottom row 4th display
Attachments
20190606_083106.jpg
20190606_083106.jpg (862.17 KiB) Viewed 2104 times
20190606_082750.jpg
20190606_082750.jpg (999.74 KiB) Viewed 2104 times
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: 2019 Hondata Mobile for Head Unit - Knock Count

Post by Hondata »

The FK8 does not have knock count, and knock level and retard are not supported by the BT app.
Hondata
FK7_
Posts: 12
Joined: Fri Jul 13, 2018 12:12 am

Re: 2019 Hondata Mobile for Head Unit - Knock Count

Post by FK7_ »

Is there a way to monitor knock control for the fk8 though the head unit? Or is data logging then going on a laptop the only way?
FK7_
Posts: 12
Joined: Fri Jul 13, 2018 12:12 am

Re: 2019 Hondata Mobile for Head Unit - Knock Count

Post by FK7_ »

Ignore the previous post. Researched about it and now understand how different the Bosch ecu is compared to the l15 Honda ecus I’m familiar with.
Post Reply