Good morning, I have recently done a few mods to my Si finally. I’ve ordered the flashpro in which it should arrive today. I’m needing some help on what exactly to do to try to get it running to be able to drive properly until I can get it to a dyno tuner. So far I have done the
RBC Swap
Acuity Cold Air Intake
RV6 Catted Downpipe
Invidia Q300 exhaust
Acuity Fuel rail
Stock injectors with adaptors
Haasport Rear Motor Mount
Acuity Short Throw Shifter
Not sure if the bottom two mods mean much if anything but just figured I’d throw them in there. Any help on where to start or what would be recommended would be greatly appreciated.
2013 Civic Si need help with basemap tune
2012+ US/Canadian Civic Si / 2013+ ILX
Return to “Civic Si 2012-2015 US/Canadian / 2013+ ILX”
Jump to
- General
- ↳ Hondata News
- ↳ Applications
- ↳ Non-Hondata
- s100/s200/s300
- ↳ s300 / SManager
- ↳ S300 Calibrations
- ↳ SManager Display Templates
- ↳ s100/s200
- ↳ Romeditor 4 Software
- ↳ HondaLogger Software
- ↳ Coil Pack Retrofit
- K-Series
- ↳ K-Pro / KManager
- ↳ K-Pro Calibrations
- ↳ KManager Display Templates
- ↳ K-Series Reflash
- FlashPro
- ↳ FlashPro Manager
- ↳ FlashPro Calibrations
- ↳ Accord 2008+ FlashPro
- ↳ Civic Si 2006-2011 Americas
- ↳ Civic Si 2012-2015 US/Canadian / 2013+ ILX
- ↳ Civic Type R 2006-2010 Japanese FD2
- ↳ Civic Type R 2007-2011 European FN2
- ↳ Civic Type R 2015+
- ↳ Civic 2016+ 1.5 Turbo Americas/Asia
- ↳ CRV 2017+
- ↳ CR-Z 2010-2012 US/Europe/Asia
- ↳ Fit 2007-2008
- ↳ RDX 2007-2012
- ↳ S2000 2006-2009 Americas/Europe/Asia
- ↳ TL 2007-2008
- ↳ TSX 2004-2014
- Traction Control
- ↳ General / Traction Control Manager Software
- ↳ Traction Control with S300
- ↳ Traction Control with KPro
- ↳ Traction Control with FlashPro
- Bluetooth Mobile Apps
- ↳ Hondata Mobile