05 Element YH2 JDM K24A RBB2 E-tune support

K-Series Programmable ECU Calibration updates / downloads
solokick3
Posts: 28
Joined: Sat Mar 12, 2011 12:32 am
Location: WORCESTER MA

05 Element YH2 JDM K24A RBB2 E-tune support

Post by solokick3 »

Hey new to the whole forum thing just wondering if someone could look over my Kal to see where I butchered the hell out of it....
so it all started when I replace the RDX injectors with Bosch 2200cc it was running perfect but i am getting ready to boost it and I'm a builder not a tuner lol also the injectors don't like the values not sure if I screw that up also I am sure I either burnt a coil or a plug getting the data I'm uploading anyone could take a look and tell me if I destroyed my tune or if its savable I would really appreciate it so much thanks
05 Element YH2
JDM K24A RBB2
50 degree
Ported type s pump
70mm tb ported cloned sk2 intake mani
and short ram intake
TSX 6 speed gears AWD Trans
2200cc Bosch Fuel injectors
fuel pressure is 45 idle-50 Wot
WALBRO 525LPH
AEM wideband wired to kpro v4
Attachments
cI Bosch 2200cc.jpg
cI Bosch 2200cc.jpg (393.09 KiB) Viewed 2870 times
2200cc base.kal
(11.63 KiB) Downloaded 97 times
2200cc log1.kdl
(2.03 MiB) Downloaded 92 times
2200cc log.kdl
(1.83 MiB) Downloaded 80 times
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: 05 Element YH2 JDM K24A RBB2 E-tune support

Post by CalibratEd »

Solo,

Do you still need help with this? I apologize I thought I had replied to your thread.

-Ed
solokick3
Posts: 28
Joined: Sat Mar 12, 2011 12:32 am
Location: WORCESTER MA

Re: 05 Element YH2 JDM K24A RBB2 E-tune support

Post by solokick3 »

I do but unfortunately i can't do anything for a while have to recover from a surgery
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: 05 Element YH2 JDM K24A RBB2 E-tune support

Post by CalibratEd »

solokick3 wrote: Mon Nov 07, 2022 1:02 pm I do but unfortunately i can't do anything for a while have to recover from a surgery
Wow, get well soon. Reach out once you’re ready.

-Ed
solokick3
Posts: 28
Joined: Sat Mar 12, 2011 12:32 am
Location: WORCESTER MA

Re: 05 Element YH2 JDM K24A RBB2 E-tune support

Post by solokick3 »

Hey Ed I'm back 90% recovered, I also have a different ecu so I kinda borrowed the last tune you did for Burgturdler the BurgturdlerRev28 and did a few modifications to get it running but it actually runs very well with only a few hiccup's as you will see if you look at the kdl's sorry they are a mess but its not a easy task when your alone trying to data log lol... im not sure about the injector settings also but here is the mess i came up with from your tune enjoy 😂🤣
Attachments
running decent3.kdl
(332.45 KiB) Downloaded 80 times
running decent2.kdl
(62.74 KiB) Downloaded 74 times
running decent1.kdl
(81.96 KiB) Downloaded 82 times
running decent (2).kdl
(351.67 KiB) Downloaded 69 times
running 2200cc decent.kal
(21.44 KiB) Downloaded 85 times
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: 05 Element YH2 JDM K24A RBB2 E-tune support

Post by CalibratEd »

I'm glad to hear you are doing well. I looked over the files. You are brave for loading a random file and wide open throttling the car. In its current state it is running rich. I always recommend starting from a base file because if you don't you may end up chasing your tail.

Also, when you changed the injectors did you change deadtimes as well?

-Ed
solokick3
Posts: 28
Joined: Sat Mar 12, 2011 12:32 am
Location: WORCESTER MA

Re: 05 Element YH2 JDM K24A RBB2 E-tune support

Post by solokick3 »

Honestly i cant get it to run on the supplied dead times
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: 05 Element YH2 JDM K24A RBB2 E-tune support

Post by CalibratEd »

solokick3 wrote: Sat Feb 25, 2023 10:51 am Honestly i cant get it to run on the supplied dead times
Does it not idle? Do you have a log and calibration file of when you modified the deadtimes?

-Ed
solokick3
Posts: 28
Joined: Sat Mar 12, 2011 12:32 am
Location: WORCESTER MA

Re: 05 Element YH2 JDM K24A RBB2 E-tune support

Post by solokick3 »

yea I cant get it to idle no IAC doesn't help either
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: 05 Element YH2 JDM K24A RBB2 E-tune support

Post by CalibratEd »

solokick3 wrote: Sun Feb 26, 2023 9:48 pm yea I cant get it to idle no IAC doesn't help either
Its best to have the deadtimes set correctly as you can have issue later on. I suggest to start with a base file and then add fuel as needed until you can get it to idle. Have you boosted the car yet?

-Ed
solokick3
Posts: 28
Joined: Sat Mar 12, 2011 12:32 am
Location: WORCESTER MA

Re: 05 Element YH2 JDM K24A RBB2 E-tune support

Post by solokick3 »

Its in it just in the wrong spot its in the back waiting for the snow to melt
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: 05 Element YH2 JDM K24A RBB2 E-tune support

Post by CalibratEd »

I will try to get a base together. When does your snow season end?

-Ed
solokick3
Posts: 28
Joined: Sat Mar 12, 2011 12:32 am
Location: WORCESTER MA

Re: 05 Element YH2 JDM K24A RBB2 E-tune support

Post by solokick3 »

should be clear by the end of march also let me know if you want i can give you access to team view on a weekend or evening after 6pm est
solokick3
Posts: 28
Joined: Sat Mar 12, 2011 12:32 am
Location: WORCESTER MA

Re: 05 Element YH2 JDM K24A RBB2 E-tune support

Post by solokick3 »

Then I wake up the next day 🤣
Attachments
Saturday morning
Saturday morning
Screenshot_2023-03-04-07-30-45-54_5a0250eb3e8a17f3d1eb70b1d1da7b29.jpg (1.25 MiB) Viewed 2477 times
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: 05 Element YH2 JDM K24A RBB2 E-tune support

Post by CalibratEd »

solokick3 wrote: Sat Mar 04, 2023 5:36 am Then I wake up the next day 🤣
Wow that's rough.

-Ed
Post Reply