Keyspan adapter, correct com port selected, 3.6.4, seems to connect successfully, (since it says connected), but shows 7/8 errs and the dash view does not update when the car is running!!
Keyspan assistant shows busy when connecting/connected and idle when not, so, drivers seem to be installed correctly..
Please give some suggestions to help out. Getting highly irratated with the simplest portion of the hondata equation not working. Romeditor/Romulator is working correctly...
Please respond
Thanks in advance
Connected, but not showing real time
Update
Yes, we can datalog within RE4... Using the Keyspan cable within HondaLogger, we can pull up the ECU info successfully, but when trying to connect, it will ocnnect, then disconnect quickly..
Tried setting the timeout a little higher..when around 200ms, it will connect but show err 5..
So, we seem to have good connection, but for some reason it will not update the live data... any suggestions would be appreciated...
Thanks in advance
Tried setting the timeout a little higher..when around 200ms, it will connect but show err 5..
So, we seem to have good connection, but for some reason it will not update the live data... any suggestions would be appreciated...
Thanks in advance