Problem Seq Shift Cut. Need help.

K-Series Programmable ECU installation questions / support issues
Locked
Dominic..
Posts: 29
Joined: Tue Mar 15, 2005 3:12 pm
Location: POLAND

Problem Seq Shift Cut. Need help.

Post by Dominic.. »

Hello.

Hard to find any information about it, becouse not many poeples using it.

We don`t know why Seq shift cut not isn`t work.
ECU PRA from Euro CTR .

We used all input for test (E16,E22,E29), and nothing.

In logs input signal arrived to ECU (E22BKSW) from the switch installed on Seq tramission, but ECU not cut...


Kmanager 1.2.2.8
Logs: www.hondata.pl/seq1.kdl
Cal: www.hondata.pl/seq2.kal

Thanks for any advice.
www.Ecu-Performance.com.pl
Euro CTR Boost - 1/4 12.066s ET
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata »

Sorry, currently it only works with the PRB calibrations, even though the parameters may be entered for the PRA. It will be added to the PRA for the next release.
Hondata
Dominic..
Posts: 29
Joined: Tue Mar 15, 2005 3:12 pm
Location: POLAND

Post by Dominic.. »

thank you for information.

When new release should be available? Ofcourse approximate date.

Thanks
www.Ecu-Performance.com.pl
Euro CTR Boost - 1/4 12.066s ET
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata »

1-2 weeks.
Hondata
Dominic..
Posts: 29
Joined: Tue Mar 15, 2005 3:12 pm
Location: POLAND

Post by Dominic.. »

any good news about new release?
www.Ecu-Performance.com.pl
Euro CTR Boost - 1/4 12.066s ET
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata »

Oct 26th at the latest.
Hondata
jostrom
Posts: 22
Joined: Mon Apr 19, 2004 11:31 pm

Post by jostrom »

Is it possible to use this feature for full-throttle shifts in a car that has a clutch pedal switch (oem k-tranny)? Just thinking of wiring the clutch pedal swith to (PRB) K-Pro.

Anyone done it already?
marccharlton
Posts: 1
Joined: Wed Jan 02, 2008 8:37 am

Sequential Shift Engine Cut

Post by marccharlton »

Hondata wrote:Oct 26th at the latest.
I have tried this feature several times with differnet inputs / timings but have failed to get it working. Last time I tried it caused engine cuts at high revs with out touching the gear lever and even disconnected. It is crutial to our racing programme and must achieve flat shifting one way or another. I read on the forum others have also failed. Has anyone succeeded to get it to work? If so how did they get it to work? What is the software change that was(?) introduced in Oct? :?:
Locked