SManager V1.3.4

Post by **Hondata** » Tue Mar 04, 2008 1:24 pm

SManager V.1.3.4 is available for download. The main change is boost by gear and rpm - this also effectively can function as boost by speed, since rpm, speed and gear are interrelated.

SManagerV1-3-4.exe

Changes:
? Firmware version 1.04
? Added boost control by rpm and gear.
? Added 'Adjust' to parameter tables.
? Added proportional table tracing.

2 0 3 · Post by **2 0 3** » Fri Mar 07, 2008 2:06 pm

Cant wait to try out the new boost control!!

turbotypeR · Post by **turbotypeR** » Fri Mar 07, 2008 8:04 pm

thank you! you guys rock!

91accordexr33 · Post by **91accordexr33** » Fri Mar 07, 2008 10:22 pm

I love the boost by gear, been using it for about 2 months now. Held solid on the dyno...
1st 6psi, 2nd 12psi, and 3rd 18psi

Using the AEM Boost sensor, works great.

planetspeed · Post by **planetspeed** » Sat Mar 08, 2008 10:09 am

Just curious how does the ecu know what gear the car is in?thanks..

Tchleung · Post by **Tchleung** » Sun Mar 09, 2008 12:04 am

RPM, Speed, and the Gear Ratio Values.

keow · Post by **keow** » Fri Mar 21, 2008 7:19 pm

i try to use gear select ratio. bot it's not working. thanks

Post by **Spunkster** » Mon Mar 24, 2008 9:59 am

keow wrote:i try to use gear select ratio. bot it's not working. thanks

Noted to be fixed

krweby · Post by **krweby** » Mon Mar 24, 2008 7:11 pm

Information shows that I have firmware ver 1.03 but will not let me upgrade to 1.04.

Post by **Spunkster** » Tue Mar 25, 2008 9:22 am

Close Smanager, reopen it, go to File, New and select one of the calibrations from the list and pload it (the one you choose does not matter). When you do this it should update the firmware. When done, upload your calibration.

krweby · Post by **krweby** » Tue Mar 25, 2008 9:25 am

Spunkster wrote:Close Smanager, reopen it, go to File, New and select one of the calibrations from the list and pload it (the one you choose does not matter). When you do this it should update the firmware. When done, upload your calibration.

Thanks. I'll give this a try when I get home tonight. I'll let you know.

krweby · Post by **krweby** » Tue Mar 25, 2008 5:24 pm

That didn't work. The update for the firmware is grayed out also.

krweby · Post by **krweby** » Wed Mar 26, 2008 6:22 pm

Ok so I got it to work. But I had to use my work laptop to do it. My laptop is running Vista (Everything was working except for being able to update the firmware.) so it might have something to do with it. My work laptop is running XP-pro. Just thought I would let you know.

I really hate Vista I'm thinking of going back to XP-pro or running VMWare so I can run my old programs that don't work under Vista.

Shmaa · Post by **Shmaa** » Tue Apr 01, 2008 7:01 pm

Whats the status on the expanded lambda conversion table?

Post by **Spunkster** » Wed Apr 02, 2008 9:18 am

Shmaa wrote:Whats the status on the expanded lambda conversion table?

Have you tried the new version?