Lambda overlay with WB on ELD pin?

[LK7R]

As i understand it is not possible to use lambda overlay on PRA ECU even if WB input is wired to ELD pin on ECU?

Will this be addressed somehow in the future please? Or do I have something missconfigured?

cheers

Dan

[LK7R]

Or is there anyone using PRA ECU with WB on ELD pin who can help me out with AF tuning?

[Spunkster]

You just have to do datalogs and the look at ehm and look at the AF value that is recorded from the ELD input you have selected.

[LK7R]

It would be much nicer if I could use lambda overlay ... I take it as "NO"

[Mr Aryan]

i see that you got the LC-1 wideband, did you wire it up with the ELD and worked well?
i have the LM-1 and had some probelm reading AFR through the K-Manager. I had to use the AEM EUGO.

[LK7R]

Yes it is working fine, i had to put -0.2V voltage offset to get correct readings, but otherwise works without any probs.

Got it real cheap - 110 GBP incl delivery to my door.

[Honda9ower]

As i understand it is not possible to use lambda overlay on PRA ECU even if WB input is wired to ELD pin on ECU?

Will this be addressed somehow in the future please? Or do I have something missconfigured?

cheers

Dan

Is this now possible?, in the kmanager change history it states:

"V1.2.4 (17 July 2008) Fixed external wideband input not showing correctly on lambda overlay."

I'm looking at buying a wideband and it would be extremely useful to be able to use the output from it for the lambda overlay.

[LK7R]

Yes it works just fine!

[Honda9ower]

Excellent!, I'll order up a wideband and controller....