B18c5 stock 98 ITR

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Locked
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

B18c5 stock 98 ITR

Post by Spunkster »

B18c5 stock 98 ITR
Attachments
B18c5 stock 98 ITR.skl
(16.5 KiB) Downloaded 5223 times
aroon
Posts: 2
Joined: Wed Feb 13, 2008 4:43 am

b18c5

Post by aroon »

whats the difference between this and a b18c-r ?????
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

USDM B18C5 has 10.6:1 compression
JDM B18C has 11.1:1 compression
dcvt16
Posts: 2
Joined: Tue Aug 19, 2008 5:03 pm

Post by dcvt16 »

sorry if in wrong place, please delete if so.

do you have a base map for the jdm b18c-r ?
LimitlessPowR
EKJOE
Posts: 18
Joined: Tue Sep 16, 2008 10:12 am

Download link gone?

Post by EKJOE »

I am unable to download this, You guys know the link is down?
omarly
Posts: 4
Joined: Wed Oct 22, 2008 8:52 pm

Re: Download link gone?

Post by omarly »

EKJOE wrote:I am unable to download this, You guys know the link is down?

bump
Civic B
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

Just go to file, new. The base calibrations are built into the software.
EKJOE
Posts: 18
Joined: Tue Sep 16, 2008 10:12 am

Post by EKJOE »

The one ITR i see is for a 2001, Is that the same as this one?
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

yes
CSAS
Posts: 26
Joined: Wed Nov 05, 2008 9:50 pm

Post by CSAS »

Spunkster wrote:yes
I isnt available anymore.
Im looking for a basemap for a 00 ITR (JDM)
Can you put it again?
Veyron
Posts: 15
Joined: Mon Feb 09, 2009 10:24 am

Post by Veyron »

because many downloads do not work?
allm0t0rGSR
Posts: 116
Joined: Tue Jun 23, 2009 10:51 pm

Post by allm0t0rGSR »

can anyone upload this agen plsss...
EK9 Rx
Posts: 6
Joined: Mon Jan 19, 2009 10:53 am

JDM B18C-R

Post by EK9 Rx »

I have read the announcement.. But still the question because i need to drive 200 miles before i get to the tuner after my swap...

I need a basemap for my engineswap. Im getting the B18C-R JDM.
Can i use the stock map that comes with the software or do i need something else?
98spec
Posts: 3
Joined: Mon Dec 28, 2009 1:14 am

calibration

Post by 98spec »

please upload again
Locked