????

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Locked
lsvtecem1
Posts: 10
Joined: Thu Jan 01, 2009 4:26 pm

????

Post by lsvtecem1 »

I have a question. How do can I convert a .bin file to .skl? I have an Ls/Vtec .bin map but need it to be .skl for Smanager. Thanks in advance.
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

In Smanager, go to File, open, make sure you have the file type set to all and open the bin you want to use.
lsvtecem1
Posts: 10
Joined: Thu Jan 01, 2009 4:26 pm

Post by lsvtecem1 »

I have tried that but when it opens the .bin file and I go to the Tables tab, the graph is all screwed up and all the numbers are too, even the rev limiter fuel compen. and so on. :cry:
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata »

Check the size of the bin file - if it is not 32768 bytes, then it is another file format renamed to .bin.
Hondata
lsvtecem1
Posts: 10
Joined: Thu Jan 01, 2009 4:26 pm

Post by lsvtecem1 »

Oh okay, its 48000 bytes. well I have another question. How do I go from 1.6 to 1.8 liter when using a P30 Basemap?
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

Under Parameters in the Fuel Trim tab, click on Calc.
lsvtecem1
Posts: 10
Joined: Thu Jan 01, 2009 4:26 pm

Post by lsvtecem1 »

Will try it out when i get a chance, but thank you for helping me. :D
Locked