FlashPro on FN2 Cruise Control problem

FlashPro questions & answers specific to the FN2 European Civic Type R
walter
Posts: 27
Joined: Thu Mar 26, 2009 5:32 am
Location: Lihuania

FlashPro on FN2 Cruise Control problem

Post by walter » Thu Jul 02, 2009 6:47 am

I have a problem with cruise control on 6th gear, it doesn't work. I tried Group N reflash and "MAP based, race header, highflow cat, stock catback." for FN2 calibrations. It works on 5th gear fine, but on 6th it works only when rpm's are at 2k-3k.

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Thu Jul 02, 2009 10:28 am

We are looking into this. Can you please provide a datalog showing the problem?

walter
Posts: 27
Joined: Thu Mar 26, 2009 5:32 am
Location: Lihuania

Post by walter » Thu Jul 02, 2009 12:26 pm

Spunkster wrote:We are looking into this. Can you please provide a datalog showing the problem?
Cruise control only works on MAP calibrations but not on 6th gear, on MAF (Groupe N reflash) I can't even switch it on. I'll make datalog tomorow.

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Thu Jul 02, 2009 5:04 pm

Do you have a Type R GT? What is the ECU code number?

walter
Posts: 27
Joined: Thu Mar 26, 2009 5:32 am
Location: Lihuania

Post by walter » Thu Jul 02, 2009 10:16 pm

Spunkster wrote:Do you have a Type R GT? What is the ECU code number?
Yes, Type-R GT. ECU code number: RSP-E03.
With MAF Groupe N reflash cruise control doesn't work at all.
With MAP raceheader tuned, when I mark "Cruise control enabled" in "Misc" it works, but not on 6th gear.

On which calibration I should datalog?

walter
Posts: 27
Joined: Thu Mar 26, 2009 5:32 am
Location: Lihuania

Post by walter » Thu Jul 02, 2009 11:51 pm

I've made two datalogs with "Group N Reflash" and "MAP based, race header, highflow cat, stock catback" calibrations.
Could you advice which calibration is better to use with bolts on like header, catback, hondata heat gasket? It seems that MAP based runs better...
Attachments
datalogs.rar
gpn.fpdl - Group N Reflash calibration datalog
map.fpdl - MAP based, race header, highflow cat, stock catback datalog
(164.59 KiB) Downloaded 319 times

nunoctr
Posts: 170
Joined: Tue May 16, 2006 12:29 pm

Post by nunoctr » Sun Jul 05, 2009 8:36 am

walter wrote:
Spunkster wrote:Do you have a Type R GT? What is the ECU code number?
Yes, Type-R GT. ECU code number: RSP-E03.
With MAF Groupe N reflash cruise control doesn't work at all.
With MAP raceheader tuned, when I mark "Cruise control enabled" in "Misc" it works, but not on 6th gear.

On which calibration I should datalog?
same problem. :(

chris87
Posts: 7
Joined: Mon Jul 06, 2009 12:23 am

Post by chris87 » Mon Jul 06, 2009 12:41 am

I have the same problem, the automotive cruise control don't work at any gear..


i only reflash the ECU with Hondata Group N Calibration

can you help ?

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Mon Jul 06, 2009 1:26 pm

We are still looking into this. It appears to only be an issue with the Type R GT since it uses a different ECU than the Base Type R. This was not something we were made aware of until now.

nunoctr
Posts: 170
Joined: Tue May 16, 2006 12:29 pm

Post by nunoctr » Mon Jul 06, 2009 1:37 pm

hondata please note that I have a FN2 GT (the only that have cruise control) and with my reflash ECU hondata group N the cruise control works fine. I have this ECU for almost a year

now with the OEM ECU with the flashpro the cruise control dosen't work.

chris87
Posts: 7
Joined: Mon Jul 06, 2009 12:23 am

Post by chris87 » Mon Jul 06, 2009 11:47 pm

thats right, with the Hondata Reflash ECU the Cruisecontrol works fine but with the OEM ECU and the Hondata Group N Calibration it doesnt work.

Please Hondata fix it soon !

Thanks

dinoc
Posts: 112
Joined: Wed May 16, 2007 4:35 am

Post by dinoc » Tue Jul 07, 2009 5:25 am

I'm looking forward for this fix, too.
Euro Honda Accord CL9

Andreyka123
Posts: 1
Joined: Tue Jul 07, 2009 12:16 pm
Location: St.-Petersburg, Russia

Post by Andreyka123 » Tue Jul 07, 2009 12:19 pm

I'm waiting this fix too...
FN2 '07

walter
Posts: 27
Joined: Thu Mar 26, 2009 5:32 am
Location: Lihuania

Post by walter » Tue Jul 07, 2009 12:35 pm

I think, everybody is waiting for this fix :D... Because you can't rest when driving on motorways :)
FN2 R-04455

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Tue Jul 07, 2009 12:51 pm

Are you using the stock ECU or the Group-N ECU with the FlashPro?

Post Reply