FP Group N calibration FN2 same as in Group N Reflashed ECU?

FlashPro questions & answers specific to the FN2 European Civic Type R
Post Reply
walter
Posts: 27
Joined: Thu Mar 26, 2009 5:32 am
Location: Lihuania

FP Group N calibration FN2 same as in Group N Reflashed ECU?

Post by walter »

I think that there is a problem with Group N calibration for FN2 in FlashPro. My car detonates when engine enters VTEC @3800rpm. I think that it is not the same calibration which was used in Group N reflashed ECU. And it seems that there is a flat spot at 2500-3500rpm.

My mods: Toda header, Milltek sport stainless steel exhaust, Hondata heatshield gasket, FlashPro, Toda hi-power clutch/flywheel kit.

With that mods Group N Reflashed ECU worked fine.

Soon I'll make datalog and put it here.
FN2 R-04455
walter
Posts: 27
Joined: Thu Mar 26, 2009 5:32 am
Location: Lihuania

Post by walter »

Here is my datalog. When I press accelerator slightly during entering VTEC @3800rpm my car jerks from 3800 till 4200rpm and there is some detonation heard in exhaust system. When I press accelerator harder during entering VTEC there is no so much jerking and detonation.
Maybe you can see from datalog what is wrong?

Thanks!
Attachments
groupn.rar
(663.94 KiB) Downloaded 344 times
FN2 R-04455
e-z
Posts: 4
Joined: Sat May 22, 2010 8:02 am

Post by e-z »

i registered the same difference like you...
the switch point is lower then the reflash ecu has...

else the full trottle sensity is different to the oem calib.
Civic 2007 FN2
Post Reply