K24A4 with 05 RSX Transmission

K-Series Programmable ECU Calibration updates / downloads
Locked
K24Zivic
Posts: 10
Joined: Fri Jul 31, 2009 9:19 pm
Location: Oregon

K24A4 with 05 RSX Transmission

Post by K24Zivic »

Is there any way to enable the K24A4 calibation with the ability to use the VSS on a 05 RSX transmission. Currently I am just converting a RSX map to the K24A4 calibrations, however this time consuming and leaves lots of room for error.

Thanks
1) 92 Civic VX: 05 K24A4 05 RSX 6 speed 06 Civic Si Shifter Electric water pump Skunk2 Stage 3 Cams OG Hasport header with 3"
2) 93 Civic K20/24 being built from tires up
3) 2017 CTR
+ Fit + Civic Hybrid + Odyssey + Grom + Ram Dually
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

No it cannot be enabled.
K24Zivic
Posts: 10
Joined: Fri Jul 31, 2009 9:19 pm
Location: Oregon

Post by K24Zivic »

Is it possible to use a PRB ECU with the calibration for a K24A4 entered into a RSX-S calibration file and get a low frequency speed signal output from the high frequency 05 RSX VSS?
1) 92 Civic VX: 05 K24A4 05 RSX 6 speed 06 Civic Si Shifter Electric water pump Skunk2 Stage 3 Cams OG Hasport header with 3"
2) 93 Civic K20/24 being built from tires up
3) 2017 CTR
+ Fit + Civic Hybrid + Odyssey + Grom + Ram Dually
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

No, for an engine swap you really need to just use an 02-04 transmission, or swap your internals into a 02-04 case with a ring gear.
Locked