FlashPro Manager V1.1.0.9 beta
-
- Posts: 13
- Joined: Wed Sep 30, 2009 6:08 am
I have a question about the tables for ignition trim vs coolant temp. Should the values be entered with a negative value or is that setup so the values entered are always pulling timing as the temp rises. For example, in the ECT hot ignition trim for both high cam and low cam are those values always considered to be negative values? If you enter a 2.0 at 203* is it pulling 2 degrees there.
Answered your post on the other forum. All values are retard; I've changed the 'Trim' label to 'Retard' to clarify it.
Last edited by Hondata on Fri Oct 02, 2009 7:27 am, edited 1 time in total.
Hondata
-
- Posts: 13
- Joined: Fri Nov 14, 2008 1:42 am
Actually there are two bugs here;you gotta right click on it and associate it with fpmanager. Just rt clik go to open with and click associate this filetype with this program.
I could do that, but it should assign it an icon automatically. Also when you install FP it defaults to have this option unchecked, and it's still opens FP when you double click on the .fpcal file. That check box is actually doing nothing. Again it's a small bug that doesn't really affect anything.
My associations are just fine... Sounds like your OS may just be fubar'ing.Pir8pete wrote:Actually there are two bugs here;you gotta right click on it and associate it with fpmanager. Just rt clik go to open with and click associate this filetype with this program.
I could do that, but it should assign it an icon automatically. Also when you install FP it defaults to have this option unchecked, and it's still opens FP when you double click on the .fpcal file. That check box is actually doing nothing. Again it's a small bug that doesn't really affect anything.
VitViper wrote:My associations are just fine... Sounds like your OS may just be fubar'ing.Pir8pete wrote:Actually there are two bugs here;you gotta right click on it and associate it with fpmanager. Just rt clik go to open with and click associate this filetype with this program.
I could do that, but it should assign it an icon automatically. Also when you install FP it defaults to have this option unchecked, and it's still opens FP when you double click on the .fpcal file. That check box is actually doing nothing. Again it's a small bug that doesn't really affect anything.
well i dunno it does it on my another pc with vista, and this one too with xp?!?! when i try to change icons manualy it says FlashProManager.exe has no icons
I tried just that on my Win7 x64 laptop and it worked just fine. Try completely removing FPro Manager and any file assocations you may have in your HKEY_CURRENT_USER which could be conflicting with the install.Pir8pete wrote:VitViper wrote:My associations are just fine... Sounds like your OS may just be fubar'ing.Pir8pete wrote: Actually there are two bugs here;
I could do that, but it should assign it an icon automatically. Also when you install FP it defaults to have this option unchecked, and it's still opens FP when you double click on the .fpcal file. That check box is actually doing nothing. Again it's a small bug that doesn't really affect anything.
well i dunno it does it on my another pc with vista, and this one too with xp?!?! when i try to change icons manualy it says FlashProManager.exe has no icons
Hi hondata,
The car is a FN2 with Map cal.
The car was tuned to 13 WOT AFR.
after using the new beta version my WOT AFR was richer than before. About 5%/6% richer.
In previous versions this never happened and I see the AFR almost every day.
Could this because of the new compensation tables?
Thanks
Nuno
The car is a FN2 with Map cal.
The car was tuned to 13 WOT AFR.
after using the new beta version my WOT AFR was richer than before. About 5%/6% richer.
In previous versions this never happened and I see the AFR almost every day.
Could this because of the new compensation tables?
Thanks
Nuno
Hi.
I can not download Flashpro manager V1-1-0-9
http://www.hondata.com/updates/FlashPro ... -1-0-9.exe
Please advice
I can not download Flashpro manager V1-1-0-9
http://www.hondata.com/updates/FlashPro ... -1-0-9.exe
Please advice