Hi Hondata
I've been uploading maps from my FlashPro to my ECU for about 2 weeks now untill 2 days ago.The program indacator on the flashpro didnt show anymore and i couldnt upload new maps.Yesterday i tried uploading from my laptop to my ECU and it worked fine but i still cant use my program function on my Flashpro.Any sugestions
@Hondata-Uploading problem
Try this:
1) Unplug the FLashPro from the vehicle and connect it only to the laptop.
2) Open the FlashPro Manager software and open a calibration.
3) Upload the calibration to the Flashpro only.
4) Unplug the FlashPro from the laptop.
5) Plug the FlashPro into the vehicle.
6) Turn the Key to the On position.
7) Hold down the Program button for longer than one second and it should begin programming the ECU.
1) Unplug the FLashPro from the vehicle and connect it only to the laptop.
2) Open the FlashPro Manager software and open a calibration.
3) Upload the calibration to the Flashpro only.
4) Unplug the FlashPro from the laptop.
5) Plug the FlashPro into the vehicle.
6) Turn the Key to the On position.
7) Hold down the Program button for longer than one second and it should begin programming the ECU.