Thursday I installed 1.4.2 and since then I haven't had it happen again. I have drove about 300 miles. Well if there is anything I can help with let me know. Thanks!
In the beta I have fixed a problem which was resetting the ECU, which could be the same problem as described here. If people with this problem could test the beta version and give feedback I'd appreciate it.
Hondata wrote:In the beta I have fixed a problem which was resetting the ECU, which could be the same problem as described here. If people with this problem could test the beta version and give feedback I'd appreciate it.
how do we test it? just install the new beta, and upload our existing calibration to the ecu trough the new beta version? or do we have to make a new calibration based on the new beta version?
i drive my wifes car everyday to school and home and notice it would jerk and goes back to normal happens about 3-4 times through out the day. Downloaded the beta and drove for 50miles so far so good. will give an update in a week and see how it does.
I have drove over 300 miles on 1.4.6 and no resets, so im going to give 1.4.7 a try. On a side note, I changed a few settings I turned vtec pressure switch off and also turned in the internal barometer on.