Does it make a difference which ECU you use for the S300?
-
- Posts: 72
- Joined: Fri Feb 16, 2007 2:23 am
Does it make a difference which ECU you use for the S300?
The question is regarding USDM ecu's and the S300.
Is there any difference between using a P72 or p28? Is there any advantage the p72 has over the p28 or any advantage the p28 has over the p72?
Thanks.
Is there any difference between using a P72 or p28? Is there any advantage the p72 has over the p28 or any advantage the p28 has over the p72?
Thanks.
-
- Posts: 72
- Joined: Fri Feb 16, 2007 2:23 am
well, the knock-board is great when using a B16/18... but for other engines?
if you look what the knock-sensor is, you'll see some kind of microphone, which gets its signal out of the engineblock. my opinion is, that the behavior of the blocks is different, clearly: what the knock-sensor shows as a knocking for a B16, needn't be a knocking for a H22, for example.
and knocking cannot be exactly shown at high rpm, because it's simply too loud to egzamin a true or false value ;)
best regards Lukas
if you look what the knock-sensor is, you'll see some kind of microphone, which gets its signal out of the engineblock. my opinion is, that the behavior of the blocks is different, clearly: what the knock-sensor shows as a knocking for a B16, needn't be a knocking for a H22, for example.
and knocking cannot be exactly shown at high rpm, because it's simply too loud to egzamin a true or false value ;)
best regards Lukas
-
- Posts: 72
- Joined: Fri Feb 16, 2007 2:23 am
-
- Posts: 72
- Joined: Fri Feb 16, 2007 2:23 am