JDM Integra Type R PRC ecu reflash

Questions / support for the K-Series ECU re-flash
Post Reply
Knox
Posts: 138
Joined: Mon Jun 06, 2011 6:01 pm

JDM Integra Type R PRC ecu reflash

Post by Knox »

Hello,

I'm thinking to send my PRC ecu for reflash to a hondata dealer but my question is, hondata reflash is for 91 octane fuel in here Cyprus I have options to 97-100 octane. Is hondata have reflash for high octane ?
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: JDM Integra Type R PRC ecu reflash

Post by Hondata »

In the US the average of the RON and MON octane ratings is used ('pump octane'); whereas most other places in the world the MON octane rating is used. 91 pump octane ~ 96 MON octane. However, I suspect that the amount of ethanol in the fuel in Cyprus is different from the US so I would recommend the KPro so that you can tune to suit.
Hondata
Knox
Posts: 138
Joined: Mon Jun 06, 2011 6:01 pm

Re: JDM Integra Type R PRC ecu reflash

Post by Knox »

thank you for advise, it will be better to go with kpro.
User avatar
Spunkster
Site Admin
Posts: 22742
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: JDM Integra Type R PRC ecu reflash

Post by Spunkster »

We are not able to reflash a PRC anyway. K-Pro is your only option.
Knox
Posts: 138
Joined: Mon Jun 06, 2011 6:01 pm

Re: JDM Integra Type R PRC ecu reflash

Post by Knox »

I asked with your UK dealer (CPL Racing) and they said me it can be reflash but anyway I think to save money and go with Kpro. Thank you for reply.
Post Reply