help with stock calibration

2007-2008 Fit
Post Reply
08_Fiji_Fit
Posts: 6
Joined: Wed Nov 28, 2012 8:18 pm

help with stock calibration

Post by 08_Fiji_Fit »

hello i have a 2008 honda fit sport automatic and i just got my flashpro today and i locked it to my vehicle with no problem but when i installed the stock base calibration i ran into a problem. After i flashed it i turned the car on and when i stepped on the gas i get no response. i have to fully step on the gas pedal all the way down for the rpm's to even move.

I also loaded the stock calibration for the 07 fit sport with that one installed the car responds fine but i cant get it out park wtf!!!!!

i need help on whats happening here.

PLEASE look at the datalog i made on what i mean i press the gas pedal and no response.
Attachments
datalog.fit.01.fpdl
(142.18 KiB) Downloaded 521 times
User avatar
Hondata
Site Admin
Posts: 10428
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: help with stock calibration

Post by Hondata »

It sounds like a MT calibration in the AT vehicle. First re-download and install FlashProManager from http://www.hondata.com/forum/viewtopic.php?f=29&t=14780. Make sure that your FlashPro is plugged in the first time you open the calibration, then it should select the AT calibration.
Hondata
08_Fiji_Fit
Posts: 6
Joined: Wed Nov 28, 2012 8:18 pm

Re: help with stock calibration

Post by 08_Fiji_Fit »

Going to try that out
08_Fiji_Fit
Posts: 6
Joined: Wed Nov 28, 2012 8:18 pm

Re: help with stock calibration

Post by 08_Fiji_Fit »

ok just did what you said and nothing same problem accours.
User avatar
Spunkster
Site Admin
Posts: 22703
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: help with stock calibration

Post by Spunkster »

Later this afternoon you should be able to redownload the software and install it and that should resolve the issue.
08_Fiji_Fit
Posts: 6
Joined: Wed Nov 28, 2012 8:18 pm

Re: help with stock calibration

Post by 08_Fiji_Fit »

sweet thank you
User avatar
Spunkster
Site Admin
Posts: 22703
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: help with stock calibration

Post by Spunkster »

You should now be able to redownload the beta version of software from the downloads section of the website, install it, and it should work.
08_Fiji_Fit
Posts: 6
Joined: Wed Nov 28, 2012 8:18 pm

Re: help with stock calibration

Post by 08_Fiji_Fit »

I'm currently at work I will try again tomorrow morning.
08_Fiji_Fit
Posts: 6
Joined: Wed Nov 28, 2012 8:18 pm

Re: help with stock calibration

Post by 08_Fiji_Fit »

now its working right thank you hondata
Post Reply