fuel level gauge
fuel level gauge
Hello guys !
I'm using on flashpro the last version , and i have problems whit the fuel level gauge on map calibration.
The gauge falls dawn on 20km after fuel warning
Falls down rapidlly from 1/2 tank
Can i do to correct that????
Thanks
I'm using on flashpro the last version , and i have problems whit the fuel level gauge on map calibration.
The gauge falls dawn on 20km after fuel warning
Falls down rapidlly from 1/2 tank
Can i do to correct that????
Thanks
Re: fuel level gauge
Give it some time to adjust and it should work correctly. We do not alter the way it functions in any way.
Re: fuel level gauge
Thanks for helping me.
The car have more than 3000 km / 1800 m from the final calibration and no improves.
The car have more than 3000 km / 1800 m from the final calibration and no improves.
Re: fuel level gauge
If you refeer tol MAP based calibration?
- Attachments
-
- MapCal.fpcal
- My calibration
- (17.06 KiB) Downloaded 453 times
Re: fuel level gauge
RC750cc fuel injectors & rotrex supercharguer.
Thanks
Thanks
Re: fuel level gauge
Your injector size is set to 1200 cc under 'Injector flow for fuel economy calc'. I think this is the cause.
Hondata
Re: fuel level gauge
Thanks!Hondata wrote:Your injector size is set to 1200 cc under 'Injector flow for fuel economy calc'. I think this is the cause.
I have tried many values from 0,750,1000, 1200..... Up to 1600 and i got the same results (the gauge is not working properly). My quesiton is, which value would you think is convenient for my injectors "RC750"?
Re: fuel level gauge
It should be what the injectors flow at the same test pressure as the stock injectors, so 750cc. If you change this value it might not take effect until you fill the fuel tank again.
Hondata
Re: fuel level gauge
Thanks again.
I'm going to try it now
I'm going to try it now
Re: fuel level gauge
Hi!
After several tanks i cant see improvements.
Could someone let me know which other components affects or has influence on the fuel level gauge?
Thanks
After several tanks i cant see improvements.
Could someone let me know which other components affects or has influence on the fuel level gauge?
Thanks
Re: fuel level gauge
Put in the stock injectors. Disable boost. Upload the 'stock equivalent' reflash using AFM. Retest over one or more tanks.
Hondata
Re: fuel level gauge
You can't correct this on map cals.neoarks wrote:Hello guys !
I'm using on flashpro the last version , and i have problems whit the fuel level gauge on map calibration.
The gauge falls dawn on 20km after fuel warning
Falls down rapidlly from 1/2 tank
Can i do to correct that????
Thanks
You need to use a afm cal (or afm cal with map fuel tables). With this cals you don't have problems.