Hey all,
I just recently purchased a brand new 07 AT ecu and flashpro from a member on tsxclub. I got the ecu installed at my Acura dealership and the flashpro manager reads everything fine and is up to date. When my friend at the dealership tried to immobilize the ecu and register the VIN, it comes up saying that he has to depress the brake and put the car in park. My TSX is manual so I can't exactly do that... How do I get passed this? Am I missing something or did my mechanic friend forget a step?
Thanks!
Installing 07AT ECU in an 04 MT
Re: Installing 07AT ECU in an 04 MT
I thought i read somewhere that the new software from Hondata was supposed to be able to support AT ECU's in MT tsx's?
Re: Installing 07AT ECU in an 04 MT
Thanks for the reply but I think you're wrong.Hondata wrote:You need a MT ECU for a MT TSX.
This is on hondata's website and there are other TSX's out there running an AT ECU on their MT TSX.
- How does this work for the 04-06 TSX?
FlashPro does not work with the 04-06 ECU, so an 07/08 ECU is required. The Honda part numbers are 37820-RBB-A21 for the manual and 37820-RBB-A71 for the automatic. They sell for a little over $600 new. The 07/08 ECU plugs in and mounts where original ECU is located. Hondata provides a wiring adapter for $50 which links the ECU programming pins to the DLC. After the ECU is installed a Honda dealer will need to match the immobilizer to the new ECU.
07-08 MT swap ECUs are hard to find for my 04-06 MT TSX. Can I use an AT ECU?
Yes. FlashPro Manager 1.7.2 or newer allows a MT calibration to be written into an AT ECU.
What AT ECU part number is supported?
37820-RBB-A71
Will the AT ECU work the same as the MT ECU?
No. Reverse lockout does not work in an MT TSX using an AT ECU. This means you will need to be more careful on 4-5 and 5-6 gearshifts as you can inadvertently move the gearshift into the reverse plane.
Can I drive my MT 04-06 TSX with the AT ECU before programming it with the FlashPro?
Yes after the immobilizer has been synchronized. It is not recommended though. There will be error codes as the ECU is looking for an AT transmission. Shifting will not work well as the AT shift logic also affects the drive by wire.
Re: Installing 07AT ECU in an 04 MT
I got the same problem. Did you ever find out what's the problem was?EdmTSX wrote:Hey all,
I just recently purchased a brand new 07 AT ecu and flashpro from a member on tsxclub. I got the ecu installed at my Acura dealership and the flashpro manager reads everything fine and is up to date. When my friend at the dealership tried to immobilize the ecu and register the VIN, it comes up saying that he has to depress the brake and put the car in park. My TSX is manual so I can't exactly do that... How do I get passed this? Am I missing something or did my mechanic friend forget a step?
Thanks!