Hello. Reuploaded today a map with the new flashpro version 1.9.5. Just found out that cruise control no longer works on my car (although no VSA check light is on). Everything else seems normal. Any ideas? Is it the new version (I have not kept an older one to retry) or is it something in my car?
Euro Accord CL9 with 07-08 TSX ECU, flashpro and 4.7 final drive
New software version and cruise control.
Re: New software version and cruise control.
This is caused by changing the final drive ratio. There is no fix at this time.
Re: New software version and cruise control.
Hello! Finally figured out what was wrong!
It is not the final drive as cruise control worked in my car both with the stock 4.388 final drive as well as the 4.764 that currently has. (Euro CL9 with TSX 07-08 MT ECU and Flashpro)
Last week, my mechanic messed with the brake switch and it was set too sensitive. Although brake lights were not on when pedal fully released, it was enough to not allow CC to engage. Released it a little and everything is fine now.
It is not the final drive as cruise control worked in my car both with the stock 4.388 final drive as well as the 4.764 that currently has. (Euro CL9 with TSX 07-08 MT ECU and Flashpro)
Last week, my mechanic messed with the brake switch and it was set too sensitive. Although brake lights were not on when pedal fully released, it was enough to not allow CC to engage. Released it a little and everything is fine now.