- Changed ignition table adjustment so that 'Set Values' applies the same value to all cam angle tables if 'Edit All Tables' is selected.
- Added function selection to nitrous outputs
- Moved Closed Loop Operation to Closed Loop tab.
- PRA fixed constant speed setting.
- [KPro4 / PRA & PRB] Added Closed Loop Target Lambda tables
- USB drivers updated to v1.0.3 (Microsoft Hardware Certified)
- [KPro4] Added flex fuel ethanol sensor smoothing and max rpm
- [KPro3/KPro4] Added analog input temperature sensor conversion.
- [KPro4] Fixed PRA target lambda staying at 14.7
- [KPro4] Fixed bug where live tuning would not update when multiple cam angles of the same table were selected.
- Added analog input conversion for the Delphi 12160855 / AEM 30-2012 fluid temperature sensor.
The main change is the addition of target lambda tables and the ability to run closed loop under boost. See the help file for instructions on how to do this.
The USB driver has been certified by Microsoft so will install on Windows 7 and above without needing confirmation. It also is available in Windows Update.