2004 S2000 KPro parts and installation

K-Series Programmable ECU installation questions / support issues
Post Reply
bdtan
Posts: 40
Joined: Thu Apr 30, 2015 1:25 am

2004 S2000 KPro parts and installation

Post by bdtan » Mon Jun 22, 2015 3:40 pm

Hi,
I have an S2000 KPro for my 2004.
The box came with the KPro ECU, USB Cable, ECU bracket, Crank and Cam sensor wiring harness adaptor and two other wiring plugs with pigtails.
Since the instructions I got say nothing about the wiring, my question is what are the two other wiring plugs with pigtails for? They are in plastic pouches with labels printed with the following numbers: GC98401158. These two packets have this identical number on the labels. What do I do with these?

Thanks,
Ben

User avatar
Spunkster
Site Admin
Posts: 17995
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: 2004 S2000 KPro parts and installation

Post by Spunkster » Mon Jun 22, 2015 3:50 pm

They are for the analog and digital inputs if you wish to use them. They are not required.

bdtan
Posts: 40
Joined: Thu Apr 30, 2015 1:25 am

Re: 2004 S2000 KPro parts and installation

Post by bdtan » Mon Jun 22, 2015 4:16 pm

Right, thanks, that makes sense. What kind of plugs will they mate to? They don't plug into the ECU, and both packages consist of only female plugs with pigtails, no male plugs..

User avatar
Spunkster
Site Admin
Posts: 17995
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: 2004 S2000 KPro parts and installation

Post by Spunkster » Mon Jun 22, 2015 4:24 pm


bdtan
Posts: 40
Joined: Thu Apr 30, 2015 1:25 am

Re: 2004 S2000 KPro parts and installation

Post by bdtan » Tue Jun 23, 2015 8:34 am

Got it.
Thanks!

bdtan
Posts: 40
Joined: Thu Apr 30, 2015 1:25 am

Re: 2004 S2000 KPro parts and installation

Post by bdtan » Tue Jun 23, 2015 9:01 am

Another question...can I use an analog input to connect a wideband for the purposes of Autotuning? Or do I need to use the ELD input for the purposes of Autotuning? Or can I use either the ELD input or analog input for Autotuning?

Thanks.

User avatar
Hondata
Site Admin
Posts: 8771
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: 2004 S2000 KPro parts and installation

Post by Hondata » Tue Jun 23, 2015 10:10 am

I'd use the analog input for the wideband input. That way you can run in closed loop using the wideband if you wish.
Hondata

bdtan
Posts: 40
Joined: Thu Apr 30, 2015 1:25 am

Re: 2004 S2000 KPro parts and installation

Post by bdtan » Tue Jun 23, 2015 12:38 pm

Excellent! So I can run the car in closed loop on a daily basis with the wideband installed via the analog input?

User avatar
Spunkster
Site Admin
Posts: 17995
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: 2004 S2000 KPro parts and installation

Post by Spunkster » Tue Jun 23, 2015 1:40 pm

yes

bdtan
Posts: 40
Joined: Thu Apr 30, 2015 1:25 am

Re: 2004 S2000 KPro parts and installation

Post by bdtan » Tue Jun 23, 2015 2:32 pm

Thanks!

The Spectacle
Posts: 95
Joined: Wed Jul 15, 2009 11:09 am

Re: 2004 S2000 KPro parts and installation

Post by The Spectacle » Wed Jul 01, 2015 5:48 am

Hondata wrote:I'd use the analog input for the wideband input. That way you can run in closed loop using the wideband if you wish.
It's not possible to do this from the ELD?

User avatar
Spunkster
Site Admin
Posts: 17995
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: 2004 S2000 KPro parts and installation

Post by Spunkster » Wed Jul 01, 2015 9:40 am

No, you cannot run closed loop from the ELD input.

afzan
Posts: 4
Joined: Thu Apr 09, 2015 10:41 pm

Re: 2004 S2000 KPro parts and installation

Post by afzan » Sat Jul 18, 2015 5:38 pm

Is it possible to run closed loop from an aftermarket wideband through a digital input? (S2000 w/ kpro4)

User avatar
Hondata
Site Admin
Posts: 8771
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: 2004 S2000 KPro parts and installation

Post by Hondata » Sun Jul 19, 2015 6:10 am

Yes.
Hondata

Post Reply