using alternative vss

K-Series Programmable ECU installation questions / support issues
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: using alternative vss

Post by Hondata »

Between power and signal on the sensor. On the datasheet link you provided it has a diagram, and also the recommended resistor value.
http://www.jameco.com/Jameco/Products/ProdDS/512401.pdf
Hondata
05typeR
Posts: 128
Joined: Thu Nov 17, 2011 6:55 pm

Re: using alternative vss

Post by 05typeR »

Thanks, I will start working on getting this mounted...unfortunately I don't have a V4 as yet
05typeR
Posts: 128
Joined: Thu Nov 17, 2011 6:55 pm

Re: using alternative vss

Post by 05typeR »

what watt resistor is best to use?

0.5w?
Adm_rsx
Posts: 25
Joined: Wed Oct 31, 2012 8:58 pm

Re: using alternative vss

Post by Adm_rsx »

How would I calculate the correct amount of pulses per km or mile ? I have a 1.5 3rd gear ratio and have a 05-06 type S.

I run 255/40/170
Adm_rsx
Posts: 25
Joined: Wed Oct 31, 2012 8:58 pm

Re: using alternative vss

Post by Adm_rsx »

Oops I hAve a 1.15 ratio 3rd gear not 1.5.....


Any input?
Thanks
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: using alternative vss

Post by Hondata »

The resistor power rating does not matter.
As for the pulse setting, have a guess or use the default, compare the indicated speed with GPS and then make an adjustment based on the difference.
Hondata
05typeR
Posts: 128
Joined: Thu Nov 17, 2011 6:55 pm

Re: using alternative vss

Post by 05typeR »

Thanks
Post Reply