Question about calibration export

K-Series Programmable ECU installation questions / support issues
Post Reply
B18ENFORME
Posts: 2
Joined: Tue Nov 24, 2015 9:34 am

Question about calibration export

Post by B18ENFORME »

Hey im fairly new here ( actually first post ) Ive got a question, I bought a EK K24A with K20Z cams running on a PRB Rsx. The last owner did tune the engine on a dyno on 94 Octabe about 1 year ago and today I wanted to change my REV limiter and my launch control without touching the last "Tune" saved on the ECU. Is there anyway i can export the Calibration from the ECU and always choose this calibration when i want to change something. Because I don't want to mess the tune on the car and load a calibration and save it on the ECU and lose his tune.

Thanks
gotslicks
Posts: 31
Joined: Wed Oct 16, 2013 8:15 am

Re: Question about calibration export

Post by gotslicks »

go to tools then download. save the tune and name it whatever you want.
B18ENFORME
Posts: 2
Joined: Tue Nov 24, 2015 9:34 am

Re: Question about calibration export

Post by B18ENFORME »

gotslicks wrote:go to tools then download. save the tune and name it whatever you want.
ahh good ill try that tomorow thanks alot!
Post Reply