Mods are intake and TP. When I was using the stock throttle mapping it was hitting 100% fine. This all started because I wanted to try and modify the throttle map. Is there something in the calibration that's causing this or a possible bug where the throttle table isn't being updated..?Hondata wrote:What are your modifications? What happens if you use the stock throttle mapping? Does it do this with a return to stock calibration?
I haven't tried a return to stock calibration because of the mods and tune. I could certainly try a stock throttle map (seems to be my next course of action), but was curious as to WHY I'm not seeing 100% now? I don't want to willy nilly keep changing things and driving around in hopes to try and figure it out since it takes so much time, and ultimately I'll still be left with the same question. I kept the throttle map relatively linear (I read Hondata's other posts about the throttle map) so I'm not sure why it's stuck at 76% and not hitting 100%?
I guess flashing the car with the stock throttle map would pinpoint that there's a problem somewhere (possibly flashpro bug), or maybe the throttle controller is off and needs to be recalibrated..? I'm only guessing.