2004 TSX K24 into my 2004 CRV

Hondata model coverage & ECU application questions.
Post Reply
wilcoxl
Posts: 4
Joined: Sun May 29, 2016 5:56 pm

2004 TSX K24 into my 2004 CRV

Post by wilcoxl » Sun May 29, 2016 6:02 pm

Car is a 2004 CRV 5 speed. Engine is a 2004 TSX. I will retain the stock 5-speed from the CRV.

I assume I can just use the TSX long block and bolt on my CRV accessories (power steering, alt, a/c) and use the CRV engine harness. Anything different about the intake manifolds that might be a concern?

For ECU, I am wondering if I can get Kpro installed in my factory 2004 CRV manual edu OR can I just use the TSX ecu (are the plugs exactly the same?)


Thanks for any info.

User avatar
Spunkster
Site Admin
Posts: 17775
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: 2004 TSX K24 into my 2004 CRV

Post by Spunkster » Tue May 31, 2016 9:44 am

What is the part number on the CRV ECU?

wilcoxl
Posts: 4
Joined: Sun May 29, 2016 5:56 pm

Re: 2004 TSX K24 into my 2004 CRV

Post by wilcoxl » Tue Dec 13, 2016 12:59 pm

37820-PNL-E02

User avatar
Spunkster
Site Admin
Posts: 17775
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: 2004 TSX K24 into my 2004 CRV

Post by Spunkster » Tue Dec 13, 2016 1:16 pm

I'm sorry, but we do not have anything that will work with that ECU.

wilcoxl
Posts: 4
Joined: Sun May 29, 2016 5:56 pm

Re: 2004 TSX K24 into my 2004 CRV

Post by wilcoxl » Tue Dec 13, 2016 2:30 pm

I'm wondering if I can just use the 2004 TSX manual ECU in my CRV. I know that the TSX ecu will look for throttle by wire so I will have to get the accelerator position sensor from the TSX.

Will the cabin harness from the CRV plug right into the TSX ecu, so that my gauge cluster works appropriately?

User avatar
Spunkster
Site Admin
Posts: 17775
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: 2004 TSX K24 into my 2004 CRV

Post by Spunkster » Tue Dec 13, 2016 3:04 pm

I do not believe any of these will work in combination with one another.

wilcoxl
Posts: 4
Joined: Sun May 29, 2016 5:56 pm

Re: 2004 TSX K24 into my 2004 CRV

Post by wilcoxl » Tue Dec 13, 2016 3:19 pm

So can I buy an ECU that is K Pro compatible and get a tune for a stock TSX motor?

User avatar
Spunkster
Site Admin
Posts: 17775
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: 2004 TSX K24 into my 2004 CRV

Post by Spunkster » Tue Dec 13, 2016 4:02 pm

The TSX ECU cannot be used, and you cannot use the stock ECU with drive by wire.

Post a picture of the inside of the stock ECU.

sass
Posts: 104
Joined: Mon Oct 06, 2008 5:07 am
Location: Evropa-Estonia-Tallinn

Re: 2004 TSX K24 into my 2004 CRV

Post by sass » Tue Mar 28, 2017 10:33 pm

Cr-v RD8+K24A2turbo+Kpro V4 prb+NPR3/6Speed+ТС+ HFS4 v3.2.
DynoWheel = 472kW / 589 N.m
HRX One Mile Challenge = Max Speed 282km
Known as Sniper

Post Reply