Subaru Impreza 560cc High Impedance Injector for CRZ

FlashPro questions & answers specific to the 2010 CR-Z (US, Euro & Asia)
Post Reply
Matt Dex
Posts: 39
Joined: Wed Jul 16, 2014 4:05 pm

Subaru Impreza 560cc High Impedance Injector for CRZ

Post by Matt Dex » Fri Nov 25, 2016 9:20 am

Hi guys,

I am planning to go with higher boost. I did upgrade my internal with a low comp forged piston and conrod. My current 310cc K20 injector may not be able to support the higher boost. I am trying to get a set of RDX injector but my mechanic suggest me to go with the impreza injector as it is easy to get in our place. With some mod on the socket it will works.

My question is, will it work? I don't see this injector in the hondata manager injector selection. Or I can just grab any injector input with closest flow. Please help. Thank You.

User avatar
Spunkster
Site Admin
Posts: 17992
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Subaru Impreza 560cc High Impedance Injector for CRZ

Post by Spunkster » Tue Nov 29, 2016 5:38 pm

You will need to know the dead times for those injectors.

Matt Dex
Posts: 39
Joined: Wed Jul 16, 2014 4:05 pm

Re: Subaru Impreza 560cc High Impedance Injector for CRZ

Post by Matt Dex » Mon Dec 05, 2016 4:30 pm

On this dead time. Do I have to do the test on the injector or i can get the figure from the factory data?

User avatar
Spunkster
Site Admin
Posts: 17992
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Subaru Impreza 560cc High Impedance Injector for CRZ

Post by Spunkster » Mon Dec 05, 2016 5:30 pm

If you can find the data then use that.

Matt Dex
Posts: 39
Joined: Wed Jul 16, 2014 4:05 pm

Re: Subaru Impreza 560cc High Impedance Injector for CRZ

Post by Matt Dex » Mon Dec 19, 2016 11:23 pm

This is what i found; dead time for the injector

10V - 1.23
11V - 1.04
12V - 0.87
13V - 0.74
14V - 0.62
15V - 0.53

How should I get the injector opening time from these figure?

User avatar
Spunkster
Site Admin
Posts: 17992
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Subaru Impreza 560cc High Impedance Injector for CRZ

Post by Spunkster » Tue Dec 20, 2016 10:33 am

Have you tried entering those values into the software?

Matt Dex
Posts: 39
Joined: Wed Jul 16, 2014 4:05 pm

Re: Subaru Impreza 560cc High Impedance Injector for CRZ

Post by Matt Dex » Wed Dec 21, 2016 6:11 am

Nope as i only see the table for injector opening time. Or it is the same thing?

User avatar
Spunkster
Site Admin
Posts: 17992
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Subaru Impreza 560cc High Impedance Injector for CRZ

Post by Spunkster » Wed Dec 21, 2016 11:05 am

Yes it is the same thing. You may want to read through the help file at: https://www.hondata.com/help/flashpro/f ... meters.htm

Matt Dex
Posts: 39
Joined: Wed Jul 16, 2014 4:05 pm

Re: Subaru Impreza 560cc High Impedance Injector for CRZ

Post by Matt Dex » Thu Dec 22, 2016 8:46 pm

Thank You. Will try. Is it ok if i change the voltage value in the table? My current table are for 6v, 8v, 10v, 12v, 14v and 16v. But the data are from 10v to 15v. If the voltage is not a fixed value, then I will change the voltage and dead time value

User avatar
Spunkster
Site Admin
Posts: 17992
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Subaru Impreza 560cc High Impedance Injector for CRZ

Post by Spunkster » Fri Dec 23, 2016 10:32 am

Yes, you will need to enter the specific data for your injectors.

Matt Dex
Posts: 39
Joined: Wed Jul 16, 2014 4:05 pm

Re: Subaru Impreza 560cc High Impedance Injector for CRZ

Post by Matt Dex » Sat Dec 24, 2016 4:53 pm

Done. Thank You. My car idling better now.

Post Reply