08 S2000 Toda Map

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
hatalu
Posts: 5
Joined: Wed Apr 12, 2017 7:36 pm

08 S2000 Toda Map

Post by hatalu »

Dear Hondata,
I bought Hondata few years ago and haven't not tune my car until now. My car is 08 S2000 CR with Comptech icebox intake, Toda Header, 70mm TP, FD4.77 and 60mm inner Toda Power Dolphin dual exhaust. I wonder it is safe to run Toda map on it? even though calibration only indicate Toda Header only, is there better Calibration map I can use? and what should my VTEC windows needs to set at? 4100-6700 or I should start VTEC at 4k? please help I'm pretty new here.
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: 08 S2000 Toda Map

Post by Spunkster »

All you can do is try it and see how it runs and make sure that there is no knock and that the AF ratio is safe.
hatalu
Posts: 5
Joined: Wed Apr 12, 2017 7:36 pm

Re: 08 S2000 Toda Map

Post by hatalu »

ok, I will datalog it and post to see if there any knock on it.
hatalu
Posts: 5
Joined: Wed Apr 12, 2017 7:36 pm

Re: 08 S2000 Toda Map

Post by hatalu »

I did the datalog today, looks like I have 2 K-Counts, from K-Count 2 and 3. Is that ok? what I need to do? can someone help me out? Log attached.
Attachments
datalog0006.fpdl
(2.74 MiB) Downloaded 187 times
Post Reply