CU2 VTEC ON Datalogging Only

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
GohardOzCu2
Posts: 12
Joined: Wed May 10, 2017 5:24 pm

CU2 VTEC ON Datalogging Only

Post by GohardOzCu2 » Sun Jun 11, 2017 6:27 am

Hi have a problem with VTEC on the supplied base map with my flashpro.VTEC only works with the flashpro connected and datalogging.
Top
User avatar
Spunkster
Site Admin
Posts: 18054
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:
Contact Spunkster

Re: CU2 VTEC ON Datalogging Only

Post by Spunkster » Mon Jun 12, 2017 9:21 am

Sounds like you may have a problem with grounds in the car. I would recommend that you unplug the FlashPro until you have resolved the issue.
Top
Post Reply

Return to “FlashPro Calibrations”