KManager V1-2-0-7

K-Series Programmable ECU installation questions / support issues
SiK LiL pLaYa
Posts: 22
Joined: Wed Apr 20, 2005 9:49 am

Post by SiK LiL pLaYa »

02SilverSiHB wrote:
SiK LiL pLaYa wrote:
02SilverSiHB wrote: you're joking right? you're asking if the boost control works on NA? :roll:
THat is NOT what I'm asking. I was wondering if the fuel and ignition correction would work on NA as of right now. I know Hondata planned on including this in KPRO so am wondering if this is it or if its something else for NA cars. I guess I should have been more specific.

My BAAAAD.
lol! sorry man..I was like..uhhhhh, wtf?
All good, that was all my badd lol.
MAX POWER 204.3/MAX TORQUE 154.4
1/4 = 14.496
SiK LiL pLaYa
Posts: 22
Joined: Wed Apr 20, 2005 9:49 am

Post by SiK LiL pLaYa »

Nevermind my question. I see that this version has IGNITION and FUEL adjustability for NA cars. Thanks HONDATA.
MAX POWER 204.3/MAX TORQUE 154.4
1/4 = 14.496
Razathorn
Posts: 469
Joined: Tue Jun 14, 2005 12:17 am
Location: Lenexa, Kansas, USA

Post by Razathorn »

I can't imagine that the per gear adjustments would be specific to running boost...
Dominic..
Posts: 29
Joined: Tue Mar 15, 2005 3:12 pm
Location: POLAND

Post by Dominic.. »

Kpro boost controller works in EUro Kpro?

and example valve selonoid from avcr could use with kpro?
k20tuRbo
Posts: 13
Joined: Mon Aug 01, 2005 8:12 am

Post by k20tuRbo »

Can someone help with the install of the solenoid? I already ordered the parts.
also is there a hi low setting? I need to run 20psi at the track, I guess I just need 2 calibrations? :?:
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata »

You really need to read the help file. There is a low and high setting, triggered from a switched input.

The solenoid goes between the manifold/turbo outlet (you have a choice) and the top of the wastegate. We'll put up some more pictures shortly.
Hondata
k20tuRbo
Posts: 13
Joined: Mon Aug 01, 2005 8:12 am

Post by k20tuRbo »

Hondata wrote:You really need to read the help file. There is a low and high setting, triggered from a switched input.

The solenoid goes between the manifold/turbo outlet (you have a choice) and the top of the wastegate. We'll put up some more pictures shortly.
alright thanks
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Solenoid Plumbing

Post by Hondata »

Here is how to connect the solenoid for a typical setup.
Attachments
bc-solenoid-lg.jpg
bc-solenoid-lg.jpg (109.07 KiB) Viewed 5051 times
Hondata
02SilverSiHB
Posts: 53
Joined: Thu Oct 03, 2002 8:39 pm
Location: San Antonio, Texas

Post by 02SilverSiHB »

whats up with the foam filter?
07 Si Sedan
locash
Posts: 288
Joined: Sat Mar 20, 2004 11:27 am
Location: Phoenix, AZ
Contact:

Post by locash »

To keep dirt and debris from clogging up the solenoid..
02SilverSiHB wrote:whats up with the foam filter?
02SilverSiHB
Posts: 53
Joined: Thu Oct 03, 2002 8:39 pm
Location: San Antonio, Texas

Post by 02SilverSiHB »

locash wrote:To keep dirt and debris from clogging up the solenoid..
02SilverSiHB wrote:whats up with the foam filter?
ah!
07 Si Sedan
k20tuRbo
Posts: 13
Joined: Mon Aug 01, 2005 8:12 am

Post by k20tuRbo »

that picture helps alot, could you please give us instructions on the wiring?
02SilverSiHB
Posts: 53
Joined: Thu Oct 03, 2002 8:39 pm
Location: San Antonio, Texas

Post by 02SilverSiHB »

k20tuRbo wrote:that picture helps alot, could you please give us instructions on the wiring?
I think he mentioned it's in the help file
07 Si Sedan
k20tuRbo
Posts: 13
Joined: Mon Aug 01, 2005 8:12 am

Post by k20tuRbo »

02SilverSiHB wrote:
k20tuRbo wrote:that picture helps alot, could you please give us instructions on the wiring?
I think he mentioned it's in the help file
Ok reading it now
02SilverSiHB
Posts: 53
Joined: Thu Oct 03, 2002 8:39 pm
Location: San Antonio, Texas

Post by 02SilverSiHB »

open kmanager

click help then contents tab
Then go to Windows and double click to open contents under it
Double click on Parameters Window.
Then scan down to Boost control and select that, it will tell you everything and even show the same pic
07 Si Sedan
Locked