no start with 4 bar map sensor

2012+ US/Canadian Civic Si / 2013+ ILX
Post Reply
redfg4si
Posts: 2
Joined: Sat Oct 28, 2017 7:32 pm

no start with 4 bar map sensor

Post by redfg4si »

just installed cte supercharger with a hondata 4 bar map and with the 4 bar the car will crank fire once and not start. car will start with the sensor unplugged but idle high. with the stock sensor the car starts right up and drives fine. tired a brand new hondata 4 bar and the car will still not start.
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: no start with 4 bar map sensor

Post by Hondata »

What does the sensor read with key on engine off?
Hondata
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: no start with 4 bar map sensor

Post by Spunkster »

What injectors are you using?
redfg4si
Posts: 2
Joined: Sat Oct 28, 2017 7:32 pm

Re: no start with 4 bar map sensor

Post by redfg4si »

using 1000cc DeatschWerks injectors. will have to check what the sensor reads and get back to you, and do you mean the reading in flashpro or voltage?
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: no start with 4 bar map sensor

Post by Spunkster »

the reading in FlashPro manager when datalogging.
Post Reply