FlashPro's power LED doesn't turn on
FlashPro's power LED doesn't turn on
One question, I just borough a new FlashPro and it's power light never came on. It will flash the ECU by itself or connected to a laptop but the light just won't come on. I know it has power since I can connect it to my phone using bluetooth while the unit is only connected to OBDII, and the mobile app runs. Is there anything I missed or is it a lemon unit?
Vehicle: 2018 Honda Civic Hatch Sport MT
Vehicle: 2018 Honda Civic Hatch Sport MT
Re: FlashPro's power LED doesn't turn on
It may have been opened and the LED is just bent and not under the hole.
Re: FlashPro's power LED doesn't turn on
Now the datalog light flashing lightly when my FlashPro is connected to OBD and also when connected with laptop...Any idea what that is?
Re: FlashPro's power LED doesn't turn on
This is normal
Re: FlashPro's power LED doesn't turn on
Question? Can I open it up and bend the LED back into the hole? Do I need a special tool to remove the LED?
Re: FlashPro's power LED doesn't turn on
No special tools are needed.
Re: FlashPro's power LED doesn't turn on
I can pull the LED out of it socket...Any suggestions?
Re: FlashPro's power LED doesn't turn on
wait... why are you pulling it out.
just bent it back straight into the hole of the casing
just bent it back straight into the hole of the casing
Re: FlashPro's power LED doesn't turn on
I can't see any legs of the LED, there is a cover at the base and only the LED stick out and everything else is covered.
Re: FlashPro's power LED doesn't turn on
Sorry, I mean I can't pull it out and I cant see any pin
Re: FlashPro's power LED doesn't turn on
Have you removed the 4 screws and carefully removed the top?
Re: FlashPro's power LED doesn't turn on
Yes, can't see the pin of the LEDs, it's covered by a socket. File attached.
- Attachments
-
- 20180814_093543.jpg (906.95 KiB) Viewed 3074 times
Re: FlashPro's power LED doesn't turn on
Just make sure they are not bent and line up with the holes above them.
Re: FlashPro's power LED doesn't turn on
Can't see any pin...Can't even move them actually...So I can't do anything and it still won't turn on...
Re: FlashPro's power LED doesn't turn on
With the top removed can you see the light coming on?
Does it work normally other than the light if the light does not come on?
Does it work normally other than the light if the light does not come on?