Real EG6 in Japan... Needing Base map

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
usmchonda
Posts: 1
Joined: Tue Jul 17, 2012 5:06 am

Real EG6 in Japan... Needing Base map

Post by usmchonda »

IM NEEDING HELP....recently finished my rebuild. It's a 1995 EG6 SiR. It was a minor build with PR3 pistons, blox dual valve springs, CTR cams and AEBS intake mani, 68mm TB. Also has usual intake, header, exhaust. Can I run the stock ECU?, if not can some one please hook me up with a base map to start of with on the s300 I have, and I do have a afr kit from innovative that I will install. Any advise would be GREAT. THANKS
Post Reply