FD2 and TC

Post Reply
McHaals
Posts: 2
Joined: Sun Mar 17, 2013 2:26 pm

FD2 and TC

Post by McHaals »

have some problem with TC in a Civic FD2. Short story:

wired TC ( Active sensors, ELD )
installed drivers, Manager..
uploaded calibration, Updated FP to 1.4.5..
In FP, TC input set to ELD, Upload cal/rom..

TC seems to work, but now cant turn off , and the car lost half of its power.
tried almost everything to turn off..
TC input -> none
retard values to '0'
removed TC, ELD wire back to original state.
upload 3 different cal/rom ( original , 2 tuned )

uninstalled all TC, FP drivers, programs, reinstall new FP145..
uploaded new rom, still have the problem..

if i push full throttle the ecu retards the ignition downt to 0, -2 degree..
heres a log:

any idea?
Thanks
Attachments
FD2.fpdl
(18.59 KiB) Downloaded 473 times
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: FD2 and TC

Post by Spunkster »

You will need to also post the calibration this datalog was made with.
McHaals
Posts: 2
Joined: Sun Mar 17, 2013 2:26 pm

Re: FD2 and TC

Post by McHaals »

made the same with all cal..

LOG made with wegry6
Attachments
wegry6.fpcal
(11.16 KiB) Downloaded 457 times
FD2KNO.fpcal
(10.96 KiB) Downloaded 464 times
fd2 wegry2.fpcal
(11.09 KiB) Downloaded 421 times
Civic-Si-RRC-1.fpcal
(1.06 KiB) Downloaded 419 times
Post Reply