CPR issues/engine cut

Hondata CPR (Coil Pack Retrofit) support
hondaracing84
Posts: 31
Joined: Tue Jan 20, 2009 11:50 am

Re: CPR issues/engine cut

Post by hondaracing84 »

Do I need to send the harness as well or just the box?
User avatar
Spunkster
Site Admin
Posts: 21225
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: CPR issues/engine cut

Post by Spunkster »

just the cpr unit itself.
hondaracing84
Posts: 31
Joined: Tue Jan 20, 2009 11:50 am

Re: CPR issues/engine cut

Post by hondaracing84 »

I am still having issues with this.
I sent in the CPR box to be tested, was told it was good
Checked the wiring harness for loose connections/joints. And verified wiring was correct and strong according to instructions.
Tried different power sources, different grounds and a combination of all.
Tried a known working distributor that worked on other ignition systems

Nothing worked. We still get a strong cut at high rpms. I'm at a loss.
User avatar
Spunkster
Site Admin
Posts: 21225
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: CPR issues/engine cut

Post by Spunkster »

Datalog and see if it registers any distributor errors.
Post Reply