Error code P0101 keeps popping up

FK2 Civic Type R 2015-2017, FK8 Civic Type R 2017-2021, FL5 Civic Type R 2023+ and Integra Type S 2024+
Post Reply
AC_FK8
Posts: 12
Joined: Thu Mar 26, 2020 4:32 pm

Error code P0101 keeps popping up

Post by AC_FK8 »

Hi this error code keeps popping up even if I checked off remove error code p0101 and p0103. I cleaned my MAF sensor and checked intake and everything. I’m running 91 octane Full race Bolt ons basemap. I noticed this error code pops up when I don’t choose the intake option for AFM to read the same as stock. Is this the cause why this error code pops up? Has popped up on me 3 separate times already


2018 Honda Civic Type R

My mods are

PRL FMIC
K&N drop in filter
3” FP
3” Exhaust
Hondata Flashpro
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Error code P0101 keeps popping up

Post by Spunkster »

Why are you using a full race calibration when you do not have the parts needed for that calibration?

Do you have a Full Race intake?
AC_FK8
Posts: 12
Joined: Thu Mar 26, 2020 4:32 pm

Re: Error code P0101 keeps popping up

Post by AC_FK8 »

I know I probably shouldn’t be running this calibration. I tried the 91 octane with IC and DP with improved throttle response. My car just feels sluggish running that preset tune. I just purchased the PRL HVI stage 2 intake system and it’s on the way.
hozay
Posts: 1
Joined: Fri Oct 29, 2021 7:32 am

Re: Error code P0101 keeps popping up

Post by hozay »

We’re you able to fix the problem? I’m dealing with the same issue
HowardFBeale
Posts: 8
Joined: Tue May 24, 2022 7:22 am

Re: Error code P0101 keeps popping up

Post by HowardFBeale »

Me too. Im removing the p0101 and p0103 correction mod right now. I have the hondata maf so im hoping i keep getting this code because i dont need the mod.
HowardFBeale
Posts: 8
Joined: Tue May 24, 2022 7:22 am

Re: Error code P0101 keeps popping up

Post by HowardFBeale »

What is your st and lt fuel trim reading? Mine was st -8-10 and lt around -15-18. Flash is done and its reading 0 on both but im assuming the ecm is now learning the mixture.
Post Reply