Blinking leds
Re: Blinking leds
Will it allow you to upload a calibration to the ECU now?
Re: Blinking leds
I will be able to check on Monday and will revert with my findings.
Re: Blinking leds
Sorry but no. The same issue exists. Cannot upload and the leds are blinking as per the video I have sent you.
Re: Blinking leds
We also tested with a diagnostic tool and that one connects as normal with the car.
Re: Blinking leds
With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.
Re: Blinking leds
I have already done this and sent it to you, last week. Nothing has been altered since then.
Re: Blinking leds
Please send the feedback again, as nothing was received.
Re: Blinking leds
I will be able to do this on Saturday as I am away.
Re: Blinking leds
With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.
Re: Blinking leds
Feedback sent again, please check
Re: Blinking leds
replied via email
Re: Blinking leds
I just received the Flashpro from you (rma 4565, no fault found). I now connected it to my laptop and I get the attached message.
- Attachments
-
- 890B64A8-048C-42CE-BAF4-334F4DB5CF8B.jpeg (19.1 KiB) Viewed 9757 times
Re: Blinking leds
I connect the Fpro to the car and the leds blink again (even without the laptop connected). Please note that I have a Plex tuning mSDM device also connected on the can bus. Could this be causing any issues?
Re: Blinking leds
The diagnostic bus in a vehicle can only ever have one device attached to it at a time.
If you attach both the FlashPro and something else to the DLC then this will corrupt the CAN data in the FlashPro.
If you attach both the FlashPro and something else to the DLC then this will corrupt the CAN data in the FlashPro.
Hondata
Re: Blinking leds
Ok. I will try removing the other device and check again