Tunning help

FlashPro questions & answers specific to the FN2 European Civic Type R
Post Reply
filip2mac
Posts: 4
Joined: Fri Jan 22, 2021 6:28 am

Tunning help

Post by filip2mac »

Hello i have recently bought a flashpro for my fn2 and i loaded up the group N base map and thee car felt really good i added pops and bangs also reduced revhang now my question is how to make more power as im guessing i need to tune the fuel tables because im geeting 14 afm at full throtle, also i would like to know how to change the target afm from the ecu.
mods: cold air intake,decated exaust with stock headers geting aftere market ones soon
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Tunning help

Post by Spunkster »

To tune for power you need to put it on the dyno so that you can measure power levels with the changes you make. Ignition will have the most effect on power levels.
filip2mac
Posts: 4
Joined: Fri Jan 22, 2021 6:28 am

Re: Tunning help

Post by filip2mac »

And what about street tunning?
Thanks for the fast response
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Tunning help

Post by Spunkster »

You really cannot tune for power properly on the street as you have no way to measure the changes that have been made.
filip2mac
Posts: 4
Joined: Fri Jan 22, 2021 6:28 am

Re: Tunning help

Post by filip2mac »

So basically right now i should just wait for my headers and after that get it dyno tuned right
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Tunning help

Post by Spunkster »

That would be the best course of action.
curtusz
Posts: 211
Joined: Sat Jun 01, 2013 10:14 am
Location: Wakefield/Leeds uk

Re: Tunning help

Post by curtusz »

If u can find a flat straight road .. virtual dyno can see differences on cam angles and ignition advance
Post Reply