New cpr kit issues

Hondata CPR (Coil Pack Retrofit) support
Boostboy89
Posts: 14
Joined: Wed May 12, 2021 11:09 pm

Re: New cpr kit issues

Post by Boostboy89 »

It didn’t have q37 so I had to take that board and put it in my ecu finally got the usb to read (port on laptop was bad) loaded my tune with the three boxes checked in smanager went to crank the car and same issue. I still haven’t tried A21 on the jumper harness and don’t see it changing anything seeing A21&A22 are the same essentially I suppose I could try and get another ecu with q37 in there or?
Boostboy89
Posts: 14
Joined: Wed May 12, 2021 11:09 pm

Re: New cpr kit issues

Post by Boostboy89 »

Alright, I also tried A21 and it didn’t work. I also connected A21 and A22 with the ignition wire and that didn’t work either
User avatar
Spunkster
Site Admin
Posts: 21225
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: New cpr kit issues

Post by Spunkster »

Send an email to support<at>Hondata.com with the following and I will issue an RMA and give you further
instructions:

Name:
Address:
Phone:
Email:
Serial#:
Description of problem:

Include a link to this thread.
Post Reply