2022 Si Rev-Match not functioning properly
-
- Posts: 4
- Joined: Tue Apr 05, 2022 7:42 pm
2022 Si Rev-Match not functioning properly
I recently got the Flashpro for my '22 Si and uploaded the 250 lbs-ft calibration to my car, however, the Rev-Match system doesn't appear to be functioning properly. Has anyone had this problem and have any way to resolve it? Also, I have disabled rev hang, could that be the culprit?
Re: 2022 Si Rev-Match not functioning properly
In FlashProManager open the diagnostics window, open the diagnostics tab and clear dtcs
https://www.hondata.com/help/flashpro/o ... window.htm
https://www.hondata.com/help/flashpro/o ... window.htm
Hondata
-
- Posts: 4
- Joined: Tue Apr 05, 2022 7:42 pm
Re: 2022 Si Rev-Match not functioning properly
Cleared all dtc's and it functions good in normal but not in sport mode, tried multiple flashes with various settings enabled/disabled
Re: 2022 Si Rev-Match not functioning properly
Post your calibration as well as a datalog showing the issue in both modes.
-
- Posts: 4
- Joined: Tue Apr 05, 2022 7:42 pm
Re: 2022 Si Rev-Match not functioning properly
Here is the calibration I have uploaded currently as well as datalogs for both modes. The problem is it doesn't Rev-Match upon downshift. There are no codes or dtc's.
- Attachments
-
- Rev-Match Sport Mode.fpdl
- (986.17 KiB) Downloaded 67 times
-
- Rev-Match Normal Mode.fpdl
- (1.18 MiB) Downloaded 58 times
-
- Hondata Base Map Stage 2.fpcal
- (15.26 KiB) Downloaded 61 times
Re: 2022 Si Rev-Match not functioning properly
What happens if you disable the Sport button boost in the Torque section?
-
- Posts: 4
- Joined: Tue Apr 05, 2022 7:42 pm
Re: 2022 Si Rev-Match not functioning properly
The problem is still present when Sport button boost is unselected. If I press the cruise control button it works but I lose all the power from the tune in either mode.